Thanks: 0
Likes: 0
Dislikes: 0
-
Re: 1959 Chevrolet El Camino - Extreme Makeover - Modeled by Christina
Originally Posted by jwork
As a friend of Al's I know he is excited about how his car turned out. Al, I need to get down there and see it for myself,
Congratulations buddy it is beautiful.
It did come out very beautiful... too bad Al sold it to a gentleman in Australia... it's long gone and to replace it Al bought a brand new Camaro. We did an extreme makeover to it already too...
Beauty Shots from the 2012 Camaro Live Broadcast
Short Before Video
Here's the before video I took after the Camaro arrived...
Brand New Camaro completely filled with swirls and scratches
The complete recorded live broadcast video
Before Shots
I didn't get a lot or very good camera shots to show the before condition but here's a few....
This shot is just to frame up the below shot which I cropped out of this shot. The thing to remember is the entire finish, both horizontal panels and vertical panels were completely trashed with scratches.
This is the passenger side front corner of the hood...
Dull, hazy, filled with swirls and scratches and the clearcoat was no where near clear.
And this is off a BRAND NEW CAR?
If you watched the Live Broadcast, you saw me clay most, not all but most of JUST the hood. Keep in mind this Camaro has only 2000 miles on it since purchased new. Look at all the brown crud that came off the hood using Blackfire Detailing Clay.
Where has this car been since rolling out of the assembly plant?
Anyone want to guess what the brown stuff is?
And here's the beauty shots...
This is Ivan, the Autogeek company logo character...
Originally Posted by Waxing Nostalgic
Great job! Beautiful truck!
On behalf of the team that did the amazing transformation to this rare and now beautiful 1959 El Camino I say thank you...
My Thursday night classes attracts a high caliber of local car enthusiasts that conduct themselves professionally both online and offline...
Originally Posted by sparklingwater
Wow i don't know what is prettier the car or tina....(obviously the car lol j/k)
Good work on the car. Everything looks clear and nice. I was actually impressed with how shiny the emblems and letters were? Did you buff those as well?
Some emblems we removed as that's the best way to buff the paint out around them and behind them, the rest we just did our best.
Originally Posted by sparklingwater
Did Tina actually inspect the whole car for swirls ? Thanks again!
No, that's all just for fun. The point being is that there are no swirls after we're done.
-
Re: 1959 Chevrolet El Camino - Extreme Makeover - Modeled by Christina
***Bump***
Lots of new members have never had a chance to see this makeover and might not know how to find the thread.
Sad to say this car is now living in Australia...
-
Super Member
Re: 1959 Chevrolet El Camino - Extreme Makeover - Modeled by Christina
Mike, so what is the brown stuff that just came off of this brand new car? Is it anything different besides the usual contamination?
Originally Posted by Mike.Phillips@Autogeek
Where has this car been since rolling out of the assembly plant?
Anyone want to guess what the brown stuff is?
-
Re: 1959 Chevrolet El Camino - Extreme Makeover - Modeled by Christina
-
Super Member
Re: 1959 Chevrolet El Camino - Extreme Makeover - Modeled by Christina
Wow...thanks. I'm about to clay my wife's car for the first time 8 years (Yikes!) and continue on with my new GG polisher\Wolfgang swirl remover combo. I'm sure her clay will come out black...lol
On a more personal note, After seeing your pictures of the Elcamino, I feel much better about being an AG customer. I'm also an amputee (BK) from being stupid in college about 20 years ago. You put a lot of hard work into your business and it goes to show that you don't let your situation hold you back like I have seen (and I'm sure you have seen also) so many times.
Keep up the hard work and because of your great company, I will try to also...lol
-
Re: 1959 Chevrolet El Camino - Extreme Makeover - Modeled by Christina
Originally Posted by rouxster
Wow...thanks. I'm about to clay my wife's car for the first time 8 years (Yikes!) and continue on with my new GG polisherWolfgang swirl remover combo. I'm sure her clay will come out black...lol
I'm confident you're going to be successful....
Originally Posted by rouxster
On a more personal note, After seeing your pictures of the Elcamino, I feel much better about being an AG customer.
I'm also an amputee (BK) from being stupid in college about 20 years ago.
You put a lot of hard work into your business and it goes to show that you don't let your situation hold you back like I have seen (and I'm sure you have seen also) so many times.
Keep up the hard work and because of your great company, I will try to also...lol
Thank you for the kind words.
I lost my leg in 1986 and have never let it slow me down...
For anyone reading this thread that might not know how I lost my leg, I did it in a boating accident with my own boat, a 1970 Sanger Flat Bottom Drag Boat that I owned for 20 years, about 14 of those years after it ran over me...
It wasn't the boats fault and I have a very strong passion for fast V-drive, big block Chevy Drag Boats... so I kept it...
This is one of the few shots I have of me racing the boat on Dexter Reservoir, in Eugene, Oregon... the fastest time I ever clocked was 111 miles per hour in 12 seconds in the 1/4 mile. The guy I bought the boat from ran 120+ in 9 seconds on the water... that's FAST!
I hope that none of you reading this ever loses any body part and if you read enough of my posts I always encourage everyone to work safe, including wearing Safety Glasses when using a power tool because you certainly don't want to lose an eye.
Pictures & Comments from September 19th Detailing 102 Class
It's important to wear safety glasses anytime you're operating power tools...
(My little sister is blind, so I know a little bit about not being able to see)
And again, thank you for the recognition for hard work, it's not always easy but I never give up...
Similar Threads
-
By Mike Phillips in forum PICTURES: Wednesday Night Detailing Classes
Replies: 37
Last Post: 06-08-2014, 10:02 AM
-
By Mike Phillips in forum Wednesday Night Detailing Classes - Info & Dates
Replies: 36
Last Post: 01-31-2014, 11:58 AM
-
By Mike Phillips in forum PICTURES: Wednesday Night Detailing Classes
Replies: 58
Last Post: 04-25-2013, 03:55 PM
-
By Mike Phillips in forum PICTURES: 3-Day CAR Detailing Bootcamp Classes
Replies: 1
Last Post: 11-13-2012, 07:41 AM
-
By Mike Phillips in forum Wednesday Night Detailing Classes - Info & Dates
Replies: 26
Last Post: 12-15-2011, 02:54 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks