autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Newbie Member Sully6541's Avatar
    Join Date
    Jan 2014
    Posts
    24
    Post Thanks / Like

    Way off the detailing topic: removing a dog door?

    I'm hoping you fine ladies and gentlemen can help. My wife and I just bought a house and there's dog door we want to remove. Luckily there was some siding left in the garage. But to fill the hole would it be plywood for the exterior insulation and then drywall? Any advise would be greatly appreciated.

  2. #2
    Super Member Mantilgh's Avatar
    Join Date
    Dec 2014
    Location
    Boonsboro, Md
    Posts
    2,724
    Post Thanks / Like

    Re: Way off the detailing topic: removing a dog door?

    Not sure drywall board would be the best for on the inside. Would work but would be afraid it would eventually fall apart from use the door sees or accidentally kicked. Could use plywood, thin veneered panel board, plastic shower board(most is textured), or also make vinyl boards(white and maybe other colors) now too that can be cut and tooled like wood.
    ____________
    "The more answers I seek, the more questions I find."

  3. #3
    Newbie Member
    Join Date
    Nov 2014
    Posts
    9
    Post Thanks / Like

    Re: Way off the detailing topic: removing a dog door?

    So the dog door is built into an exterior wall in a heated/living space or in a unheated space like a garage? If it's in the garage/unheated space you may not even have insulation or a vapor barrier, it all depends on where you live and if the builder was cheap. Only way to know is when you remove the dog door and can see the insides. Most likely your layers are the siding, vapor barrier of some kind, insulation, then drywall. Repair the hole in that order. Maybe you can find someone at a local home hardware store that can help with what vapor barrier and insulation you need.

    If the interior wall is drywall, cut a new piece of drywall to fit the hole as flush as possible, set it aside and in the hole build a box of 2x4s, with the small edge facing you, so that half the edge is under the old drywall and the other half sticks out so you have something to screw your new drywall piece into by using drywall screws. Barely sink the screw heads into both the old and new drywall. Screwing in both old and new drywall into the stud adds support. Use drywall patch to smooth over all crevises and screws, let dry, smooth the patching with sandpaper, then paint.

    There are probably plenty of YouTube videos on patching large drywall holes.
    Last edited by thatrabidhobo; 01-19-2015 at 12:44 PM. Reason: Clarifications

  4. #4
    Super Member
    Join Date
    Aug 2014
    Posts
    1,445
    Post Thanks / Like

    Re: Way off the detailing topic: removing a dog door?

    The answer is yes.
    It goes, plywood, insulation, then drywall. Remember, insulation, once packed too tightly, begins to lose it's insulating properties. It's made of glass, so it needs space between itself.

  5. #5
    Newbie Member Sully6541's Avatar
    Join Date
    Jan 2014
    Posts
    24
    Post Thanks / Like

    Re: Way off the detailing topic: removing a dog door?

    Thanks for the replies. And yes it was a door built into an exterior wall to a heated living space

Similar Threads

  1. Off topic. Fiberglass detailing tub
    By arthur1920 in forum Ask your detailing questions!
    Replies: 12
    Last Post: 05-31-2020, 12:10 PM
  2. Removing Scratches under door handles
    By PriusPrime in forum Auto Detailing 101
    Replies: 16
    Last Post: 02-12-2020, 05:36 PM
  3. Questions on a dirty topic: door jambs and panels
    By touringsedan in forum Ask your detailing questions!
    Replies: 2
    Last Post: 05-09-2012, 07:08 PM
  4. On the topic of professional detailing...
    By JCruiza120 in forum Auto Detailing 101
    Replies: 2
    Last Post: 09-22-2009, 03:58 PM
  5. Replies: 36
    Last Post: 04-06-2007, 04:27 PM

Members who have read this thread: 0

There are no members to list at the moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» March 2024

S M T W T F S
2526272829 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31 123456