autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 5 12345 LastLast
Results 1 to 10 of 46
  1. #1
    Super Member Dwayne's Avatar
    Join Date
    May 2006
    Location
    Stuart, FL
    Posts
    722
    Post Thanks / Like

    Foam Cannon HP Foaming Lance for your Pressure Washer



    Turn a pressure washer into a high powered foamer!


    Cover your vehicle in a flurry of foam quickly with the Foam Cannon HP! This foam lance works with a pressure washer to produce a thick, clinging foam. Give your vehicle a "touch-free" wash with this high powered foam gun. The Foam Cannon HP will blow you away!

    The benefit of using a foam gun to deliver the soap to the vehicle is that it doesn't require you to touch the vehicle, which could rub dirt against the paint. The Foam Cannon HP sprays the vehicle with a thick coat of soap to loosen and lubricate dirt. On dusty or lightly dirty vehicles, you may not even need to hand-wash. The Foam Cannon HP minimizes the amount of hands-on contact with the vehicle, which can minimize wash-induced swirls. Plus, the Foam Cannon HP is a blast!




    Take your pick, we have Foam Cannon HP's with your choice of Autogeek, Pinnacle or Wolfgang logo and 6 different connectors to choose from.

    Autogeek Foam Cannon HP Kit with Free Bonus

    Pinnacle Foam Cannon HP Kit with Free Bonus

    Wolfgang Foam Cannon HP Kit with Free Bonus



    DP Xtreme Foam Formula and a Foam Cannon HP!!!
    Last edited by Dwayne; 07-11-2009 at 07:09 PM.

  2. #2
    Junior Member
    Join Date
    Jun 2007
    Posts
    42
    Post Thanks / Like

    Re: Foam Cannon HP Foaming Lance for your Pressure Washer

    WOW. All I can say

  3. #3
    Super Member
    Join Date
    May 2009
    Location
    Great Lakes Region
    Posts
    386
    Post Thanks / Like

    Re: Foam Cannon HP Foaming Lance for your Pressure Washer

    My car looks just like that if parked outside in January! What's the big deal?

    Frosting on a cake. Very impressive foam coating.

  4. #4
    Junior Member mr.haributo's Avatar
    Join Date
    Feb 2009
    Location
    95035
    Posts
    42
    Post Thanks / Like

    Re: Foam Cannon HP Foaming Lance for your Pressure Washer

    This is good news. I've been looking for a place that sells foam cannons. Most support the Karcher pressure washers. It's good to see there are options for folks that don't have a Karcher.

  5. #5
    Newbie Member
    Join Date
    Jan 2009
    Location
    Memphis, TN
    Posts
    7
    Post Thanks / Like

    Re: Foam Cannon HP Foaming Lance for your Pressure Washer

    What fitting do I need for a Campbell Hausfeld? It looks like the Kew/Alto.

    I want it to look like this:


  6. #6
    Super Member Dwayne's Avatar
    Join Date
    May 2006
    Location
    Stuart, FL
    Posts
    722
    Post Thanks / Like

    Re: Foam Cannon HP Foaming Lance for your Pressure Washer

    Quote Originally Posted by Two Dogs View Post
    What fitting do I need for a Campbell Hausfeld? It looks like the Kew/Alto.
    That should be it but if you can post a picture of your current connector I can confirm it for you. We want to make sure that you get the right one for your pressure washer.

  7. #7
    Junior Member mr.haributo's Avatar
    Join Date
    Feb 2009
    Location
    95035
    Posts
    42
    Post Thanks / Like

    Re: Foam Cannon HP Foaming Lance for your Pressure Washer

    I too have a Campbell Hausfeld but it is a very old model that is most likely discontinued. The fitting I would need is the Lavor. Make sure you double check or post a picture so we can verify.

  8. #8
    Super Member Harleyguy's Avatar
    Join Date
    Jan 2009
    Location
    Parkland South Florida
    Posts
    2,349
    Post Thanks / Like

    Re: Foam Cannon HP Foaming Lance for your Pressure Washer

    Maybe you can post a close up picture of the foam cannon's fitting so we can see what that looks like .I have a sears pressure washer the front wand unscrews from the middle so would i screw the foam cannon to the section that is still connected to the handle .I'm sure there is going to be alot of questions about hooking up foam cannons now.Or should just post pictures with our questions ?? Thanks Dwayne
    Lamborghini Broward

  9. #9
    Super Member Dwayne's Avatar
    Join Date
    May 2006
    Location
    Stuart, FL
    Posts
    722
    Post Thanks / Like

    Re: Foam Cannon HP Foaming Lance for your Pressure Washer

    Quote Originally Posted by Harleyguy View Post
    Maybe you can post a close up picture of the foam cannon's fitting so we can see what that looks like .I have a sears pressure washer the front wand unscrews from the middle so would i screw the foam cannon to the section that is still connected to the handle .I'm sure there is going to be alot of questions about hooking up foam cannons now.Or should just post pictures with our questions ?? Thanks Dwayne
    The foam cannon has 1/4" female threads so you could go directly to the cannon without a connector if your wand has 1/4" male threads. Otherwise, you will need a fitting to make the connection.

    Best bet is to show a picture of the piece that you are removing and also the fitting that you need to connect to and it will be easy to determine which connector that you need.

  10. #10
    Newbie Member
    Join Date
    Jan 2009
    Location
    Memphis, TN
    Posts
    7
    Post Thanks / Like

    Re: Foam Cannon HP Foaming Lance for your Pressure Washer

    It looks like this:



    Maybe that is a Lavor?

Page 1 of 5 12345 LastLast

Similar Threads

  1. Bought a new pressure washer - need foam lance/gun
    By JMak97008 in forum Auto Detailing 101
    Replies: 13
    Last Post: 12-19-2018, 03:35 AM
  2. Pressure washer quick disconnect for foam lance
    By PoorOwner in forum Auto Detailing 101
    Replies: 0
    Last Post: 07-30-2012, 01:39 AM
  3. Costco Snap On pressure washer foam lance fitting?
    By Anto in forum Auto Detailing 101
    Replies: 1
    Last Post: 07-20-2012, 08:34 AM
  4. Replies: 4
    Last Post: 02-21-2012, 06:17 PM
  5. Replies: 6
    Last Post: 10-28-2011, 03:11 PM

Members who have read this thread: 0

There are no members to list at the moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» March 2024

S M T W T F S
2526272829 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31 123456