Dr. Beasley's NANO LS-10 Spray

**Craig Encinitas** · 02-22-2021, 02:52 PM

Dr. Beasley?s LS-10 is the latest in 100% IN-ORGANIC Ceramic Nano Coatings. - YouTube

1 minute ad for the product

Sent from my iPhone using AGOnline

**briarpatch** · 02-22-2021, 04:01 PM

Originally Posted by DrBeasleys

Thank you for starting this thread!

I'm Chris Racana, Director of Success at Dr. Beasley's and would like to share my personal experience with LS-10!

Talk about ease of application! I coated the "family truckster" a couple of weeks ago. I sprayed a fine and even mist across the entire (dry) hood, wiped with microfiber towel to ensure even coverage, flipped microfiber towel to dry side, buffed off. I continued panel by panel... Super easy application as it good for glass and trim as well as paint!

Anyway, LS-10 is not intended as a "topper". That is what our AdvanceCoat:Gloss, AdvanceCoat: Matte and AdvanceCoat: Glass products are for, rather it is a stand-alone product! However, LS-10 does pair well with our Z1 all-in-one product.

Thanks again for starting the thread, curious to hear feedback!

Does LS-10 have a cure time?

**SR77** · 02-22-2021, 04:54 PM

Chris,

Do the MF towels have to be thrown out after applications with LS-10? Any issues with this on the towels or sprayer head?

Also since this says its a 1 year coating, can drying aids be used on top of it after a wash throughout that year?

thanks

**PaulMys** · 02-22-2021, 06:53 PM

I'm also assuming the prep is the same for this as with other coatings?

* I have yet to see Mike's vid, but the AG description makes no mention of prep*

**fly07sti** · 02-22-2021, 09:16 PM

I’m interested to hear some members results. My usual go to for these type of results is CanCoat and it does more than what they claim so until I hear something else, I’ll just sit back and watch.

**briarpatch** · 02-23-2021, 11:55 AM

Originally Posted by fly07sti

I’m interested to hear some members results. My usual go to for these type of results is CanCoat and it does more than what they claim so until I hear something else, I’ll just sit back and watch.

It is supposed to be delivered tomorrow......hopefully I will get a chance to use it shortly and can at least report on the user experience

**Me Time** · 02-25-2021, 10:00 AM

I would like to know about this also. When I use anything with a SIO2 in it the towels immediately go into an APC water bucket. So far so good, no crunchy towels.

Originally Posted by SR77

Chris,

Do the MF towels have to be thrown out after applications with LS-10? Any issues with this on the towels or sprayer head?

Also since this says its a 1 year coating, can drying aids be used on top of it after a wash throughout that year?

thanks

Hi