autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Regular Member Lance Mark's Avatar
    Join Date
    Mar 2021
    Posts
    166
    Post Thanks / Like

    Plastic Black Unpainted Parts

    There are a few parts on my bike that are unpainted plastic. One of the most prominent being the access cover and frame on the lower fairings.

    As well, I have grill covers over the speakers in the bags as well as the speakers in the grill.

    The grill covers on the bags just got replaced, but they will get dirty.

    These don't get washed when the bike gets washed. The speakers are made to be weather proof, but I can't see any good coming from filling a speaker pod up with water and soap and then rinsing it out. The only treatment the grills have gotten is a quick wipe with a detailer.

    The only thing Ive done to the black plastic on the lower fairings is wash it and wipe it down with a detailer.

    Is there a way to renew and protect plastic like this on my bike?

    Plastic Black Unpainted Parts-plastic-jpgPlastic Black Unpainted Parts-grill-jpg

  2. #2
    Super Member Bruno Soares's Avatar
    Join Date
    Mar 2017
    Location
    Southeastern PA
    Posts
    2,137
    Post Thanks / Like

    Re: Plastic Black Unpainted Parts

    Solution Finish is the only way to bring faded black plastics back to life. And then you'd want to use a sealant on that, something like Wolfgang Exterior Trim Sealant (applied after SF cured).

    For new plastic that is not faded yet, I'd recommend a coating. CarPro Dlux or Gyeon Trim. Those will make the plastic look darker and new for a long time.

    Both approaches above will require a full cleaning first, something like an APC and good wash to ensure bonding is optimal.
    Bruno Soares


  3. Likes PaulMys, luckycarretera liked this post
  4. #3
    Super Member 2black1s's Avatar
    Join Date
    Jan 2015
    Location
    Simi Valley, CA
    Posts
    1,409
    Post Thanks / Like

    Re: Plastic Black Unpainted Parts

    There are many products available to address the plastic trim on your Harley. Which is best depends on many factors, one of which is how much effort you want to put into it.

    From my perspective, the products fall into 2 categories.
    - Maintenance products
    - Restoration products

    From the description and appearance of your bike I think you're looking for a maintenance product. Again, maintenance products can be categorized...
    - Protectants (in generic terms, think Armor-All)
    - Sealants
    - Coatings

    Any of these will work to improve the appearance and provide some protection to the plastic parts. I have never used a coating on my bike so I can't speak to their user-friendliness, but from my exposure to such products on this forum they will provide the longest lasting protection. I opt for the "protectant" and/or "sealant" variants for my bike. They are simple to apply, are aesthetically pleasing, and provide enough protection for my needs.

    More often than not I will use Meguiar's Ultimate Black Plastic Restorer. Even though this product's name implies it is a restoration product, I see it as more of a maintenance product that falls into my "sealant" category. It is not a true restoration product like the "Solution Finish" noted in the previous post. The Meguiar's Ultimate Black Plastic Restorer dries to the touch without any oily or greasy residue left behind, like you might find with some "protectant" products and that is why I consider it as a sealant and use it as my primary product.

    Additionally, I've found the Meguiar's Ultimate Black Plastic Restorer to be the perfect product for maintaining other items on my bike, i.e., the matte black switch housings on the handlebars, the seat and other vinyl trim, and even the tire sidewalls. Many people will tell you to never apply anything to motorcycle tire sidewalls, but I can't deal with crappy looking tires on an otherwise perfectly cleaned/detailed bike. The Meguiar's Ultimate Black Plastic Restorer works perfectly to maintain a nice black satin finish on the tire sidewalls and since it dries to the touch it will not migrate to the tire tread like some "protectants" might do.

    In this and your previous threads you haven't brought up maintaining the engine cases yet. My suggestion there is S-100 Engine Brightener. I've tried several variants of this product, i.e., Pig Spit, Harley's version (whatever it's called - I don't recollect off hand), WD-40, and none work as well for me as the S-100.

    One last point. The access covers and surrounds on the lower fairings are some weird material. Kind of a very rubbery vinyl of some nature. These can sometimes be problematic in getting a uniformed looking finish with any products I have tried. These parts are one of those cases where you just have to do the best you can and call it good enough.

  5. #4
    Regular Member Lance Mark's Avatar
    Join Date
    Mar 2021
    Posts
    166
    Post Thanks / Like

    Re: Plastic Black Unpainted Parts

    Until now, I've used S-100 to clean the entire bike. Thank for the nod on their engine brightener, I ws going to try that or Pig Spit

  6. #5
    Super Member The Guz's Avatar
    Join Date
    Jun 2013
    Location
    Lawndale, CA
    Posts
    7,802
    Post Thanks / Like

    Re: Plastic Black Unpainted Parts

    If it needs restoration solution finish topped with the protection of your choice.

    Pinnacle Black Label Ceramic Trim Restorer on top of solution finish looks great.
    If it doesn’t need restoration any trim protectant will work whether it’s a sealant or coating.

Similar Threads

  1. what to use on exterior plastic unpainted trim?
    By ron7000 in forum Auto Detailing 101
    Replies: 10
    Last Post: 07-23-2018, 06:45 AM
  2. Light scuffs on (unpainted) plastic. Best approach?
    By SayNoToPistons in forum Ask Mike Phillips your detailing questions!
    Replies: 8
    Last Post: 03-25-2015, 09:52 AM
  3. what to use on unpainted exterior plastic
    By zvez in forum Ask Mike Phillips your detailing questions!
    Replies: 10
    Last Post: 02-02-2015, 09:16 AM
  4. Can I polish chromed plastic parts?
    By DaC in forum Auto Detailing 101
    Replies: 2
    Last Post: 01-12-2013, 01:48 PM
  5. Plastic parts
    By wilkey in forum Auto Detailing 101
    Replies: 8
    Last Post: 04-11-2007, 05:26 PM

Members who have read this thread: 5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» October 2021

S M T W T F S
2627282930 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31 123456