Video: Trying P&S Bead Maker for the first time.

[Pats300zx]

Anyone know minimum temp to apply beadmaker? My first try it didn’t work


Sent from my iPhone using Tapatalk

I wouldn't apply below 50 degrees.

[minerigger]

Well that was my problem with Beadmaker and Premier. It was closer to 40


Sent from my iPhone using Tapatalk

[Klasse Act]

I applied Beadmaker in upper 40 degree temps with success but I don't know what the humidity was though. This was done in a wet application, followed by a dry one and finally a straight up dry application.

As far as IGL Premier goes, because of cost, I'm not risking it, I'll be waiting till spring to apply it. Everything I've read about this product has been nothing but positive and I feel this product is laying in wait to become something spectacular, although some in better weather states may already know this. I'm wondering how the looks of IGL Premier are upon application as well as after cure time....anyone?

Sent from my SM-G950U using Tapatalk

[Thomkirby]

[QUOTE=minerigger;1611903]Well that was my problem with Beadmaker and Premier. It was closer to 40


I am surprised that it was that warm in Casper at this time of year! Buy a heater for your garage or wait until it warms up in May. A very long time ago I lived on the side of Casper mountain so I remember the blowing snowstorms.

[minerigger]

It’s been crazy warm and very little snow. Just windy as all hell. I do believe even those folks in Chicago would not enjoy this. Last 3 days was 45+ today we had 60+ winds. But damnit my truck looks good


Sent from my iPhone using Tapatalk

[Klasse Act]

It’s been crazy warm and very little snow. Just windy as all hell. I do believe even those folks in Chicago would not enjoy this. Last 3 days was 45+ today we had 60+ winds. But damnit my truck looks good


Sent from my iPhone using Tapatalk

It's been great the past 3 days but trumps about to level out starting tomorrow, still not complaining

Sent from my SM-G950U using Tapatalk

[OrangeVee]

Thanks for video. Sponsored not sponsored... don’t really give a $h!#. You do you pan keep them videos coming out. Whatever floats my boat I’ll give a try and form my own opinions. Y’all take this to serious. It’s a video.... about foam...... to clean wheels.....


Sent from my iPad using Tapatalk

Amen to that and thanks for your support!

[rlmccarty2000]

I applied Beadmaker in upper 40 degree temps with success but I don't know what the humidity was though. This was done in a wet application, followed by a dry one and finally a straight up dry application.

As far as IGL Premier goes, because of cost, I'm not risking it, I'll be waiting till spring to apply it. Everything I've read about this product has been nothing but positive and I feel this product is laying in wait to become something spectacular, although some in better weather states may already know this. I'm wondering how the looks of IGL Premier are upon application as well as after cure time....anyone?

Sent from my SM-G950U using Tapatalk

IGL Ecocoat Premier looks as good as any SiO2 topper on side by side tests. No real cure time needed. Apply and wipe off. Not as slick as most, but slickness doesn’t do anything. Great self cleaning effect.

[Klasse Act]

IGL Ecocoat Premier looks as good as any SiO2 topper on side by side tests. No real cure time needed. Apply and wipe off. Not as slick as most, but slickness doesn’t do anything. Great self cleaning effect.

Ooooooo, self cleaning!

[sixsix]

Finally had a chance to try this stuff out on my Expedition. The truck was coated about 3 years ago and the coating is all but gone on the lower half of the doors and the rear bumper, but the hood, roof and tops of the fenders are still going strong. I wash and dried then applied the bead maker fairly heavy. It goes on nice and easy and wipes off with no issues. The surface was deff slick once finished. Check it again the next day and it was still quite slick, couldn't really tell if it was more than right after I applied it. Pulled it out of the garage and into the sun and it was quite shiny. If the slickness last past the first wash, then I'll be impressed. As of now, I have other products that produce similar results. I wouldn't really call it a game changer, but it is a good product.