Black Lexus 2011 AWD IS 250 Dealer Post Prep. Suggestions

[Ncs0816]

A new client came to me today with this car

He only has a budget of $170

Any suggestions on what to use and what steps I could do to make it better

I was thinking wheels,wheel wells and rims,
Wash , Clay, power lock and then collinite

See below




Sent from my iPhone using Tapatalk

[Ncs0816]

Wheels are very clean but was thinking about iron x just to be certain


Sent from my iPhone using Tapatalk

[parttimer]

I would do something like menz 2500 or reflect then seal. That is what I've been doing for new car cheap packages.

[Ncs0816]

Ok


Sent from my iPhone using Tapatalk

[Ncs0816]

Thanks


Sent from my iPhone using Tapatalk

[Vegas Transplant]

HTTR

[jmsc]

1. How many (or few) cc scratches/swirls do you see on the paint?

2. I would do the tires and wheels, skip the wells.

3. Clay (if needed) but do either PL or Collie not both.

[custmsprty]

I'd use something like Blackfire Total Polish and Seal then top it with a sealant of your choice. That would give the paint a good cleansing. Or the new Wolfgang Uber AIO.

[Tato]

It would be a good candidate for Uber AIO, like said above.

Your process seems right, but after claying it's interesting to do at least a light polishing step to remove marring, light swirls etc...

After that you may stop (UBER AIO or others AIO already offers protection) or top it with a coat of wax if you'd like to do a bit more rubbing!

Good luck,

Kind Regards.

[ShaunD]

So what was the outcome? How many miles were on the car? And did the customer request and or say he/she was looking to achieve?