Thanks: 0
Likes: 0
Dislikes: 0
-
Re: How to use a one-step cleaner/wax to maximize profits
What are some good one step cleaner/ wax for these types of jobs? and that would also be safe for most paints?
-
Super Member
Re: How to use a one-step cleaner/wax to maximize profits
Originally Posted by ziggo99
Mike, what type of correction did you see with one stepping on this job? I always have a problem when doing details with giving too much correction or not enough. I'm sure I could get by with using Meguiar's Cleaner Wax in the maroon bottle with a LCC Tangerine pad and none of the clients would notice the difference. But I always think there will be that one client who does, and make me wish I did a little bit more. What would be a safe % of correction for clients on one steps, do you think?
I advertise my AIO (express detail) as "light paint correction." I don't promise it will remove swirl marks (but it will for light swirls).
Most people are just looking for the SHINE! They can't even see the swirl marks or it just doesn't bother them (or they just think that's how all car paint looks). Ether way, my plan is simple: under promise, over deliver. If the customer is actually asking about getting rid of swirls and scratches we talk about higher level packages with more intensive polishing included.
-
Re: How to use a one-step cleaner/wax to maximize profits
What is the correct pad/speed to use when using an AIO? Also how do you just lay it on like regular wax or work it in like a polish?
-
Super Member
Originally Posted by phillycobra
What is the correct pad/speed to use when using an AIO? Also how do you just lay it on like regular wax or work it in like a polish?
Higher speed + more aggressive pad gives more correction like a polish. Lower speed + less aggressive pad acts more like a normal wax.
Sent from my LG-VM701 using AG Online
-
Super Member
Re: How to use a one-step cleaner/wax to maximize profits
Originally Posted by phillycobra
What is the correct pad/speed to use when using an AIO? Also how do you just lay it on like regular wax or work it in like a polish?
That would depend on what the paint needed as referenced in the post above about pad and speed.
-
Re: How to use a one-step cleaner/wax to maximize profits
Originally Posted by Nicholas@Autowerx
Most people are just looking for the SHINE! They can't even see the swirl marks or it just doesn't bother them (or they just think that's how all car paint looks). Ether way, my plan is simple: under promise, over deliver. If the customer is actually asking about getting rid of swirls and scratches we talk about higher level packages with more intensive polishing included.
That's a good plan and approach... reminds me of this...
The difference between a swirl and squirrel
In most cases, just making the paint clean, shiny and brighter is exactly what a customer is looking for...
-
Re: How to use a one-step cleaner/wax to maximize profits
Originally Posted by phillycobra
What is the correct pad/speed to use when using an AIO? Also how do you just lay it on like regular wax or work it in like a polish?
What pad and speed depends on a couple of things but in most cases if you're only going to do one-step, or one machine applied product to the paint step, then you want to use a soft polishing pad so your chances of finishing out nice are as best as possible.
As for speed, that depends on the tool and the condition of the paint.
Another HUGE factor when using a one-step to NEGLECTED paint is to use the product heavy or wet. By the words heavy or wet I mean use plenty and even lots of product. Certainly don't under-use product as you want a lot of LIQUID chemical cleaners on the surface going to work for you and also lubricating the surface as you buff.
The talk about applying a THIN coat of wax only applies to "finishing waxes" or "finishing sealants"
- What type of tool are you using?
- What are you working on?
Good questions by the way...
-
Re: How to use a one-step cleaner/wax to maximize profits
Here's a very in-depth article anyone detailing cars for money should read especially if they are new to professional detailing...
Lots of confusing cleared up in this article...
The Difference Between a Cleaner/Wax and a Finishing Wax
Subtitle: How To Choose The Right Wax or Paint Sealant for your Detailing Project
-
Super Member
Re: How to use a one-step cleaner/wax to maximize profits
Every so often I am back to reading this thread and the attached links. There's always a way to get better and be more efficient. Completely nailed it on machine cleaning the windows. saves time and it looks great .Let's face it, it's going to annoy the customer if they get in their nice shiny car and they end up looing through water spots. Great info.
-
Regular Member
Re: How to use a one-step cleaner/wax to maximize profits
This is excellent advise! One step is my top selling package, a big part of my customer base are daily driven vehicles. Every client is blown away with the results and is usually above their expectations, and all from just a onestep polish. A happy customer is money in the bank and keeps me in business!
Similar Threads
-
By Based in forum Auto Detailing 101
Replies: 20
Last Post: 09-21-2015, 04:33 AM
-
By Mike Phillips in forum Ask your detailing questions!
Replies: 13
Last Post: 03-16-2014, 11:53 AM
-
By Nick McKees37 in forum How to Articles
Replies: 28
Last Post: 04-17-2013, 11:44 PM
-
By shadowstep in forum Auto Detailing 101
Replies: 8
Last Post: 09-23-2010, 07:43 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks