autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 23
  1. #1
    Mike Phillips
    Guest

    DA Polisher Trouble Shooting Guide

    DA Polisher Trouble Shooting Guide


    Tyler, age 15 removing swirls using a Porter Cable 7424XP Dual Action Polisher


    When you're first starting out machine polishing and learning to use a DA Polisher it's common to have questions about your results and your results are directly tied to your technique.

    Here's a list of the most common problems,

    1. Trying to work too large of an area at one time.

    2. Moving the polisher too fast over the surface.

    3. Using too low of speed setting for removing swirls.

    4. Using too little downward pressure on the head of the polisher.

    5. Using too much downward pressure on the head of the polisher so the pad quits rotating.

    6. Not holding the polisher in a way to keep the pad flat while working your compound or polish.

    7. Using too much product or using too little product.

    8. Not cleaning the pad often enough.


    Here's a list of the solutions in matching order,

    1. Trying to work too large of an area at one time.
    Shrink the size of your work area down. You can't tackle to large of an area at one time. The average size work area should be around 20" by 20". Most generic recommendations say to work an area 2' by 2' but for the correction step, that's too large. You have to do some experimenting, (called a Test Spot), to find out how easy or how hard the defects are coming out of your car's paint system and then adjust your work area to the results of your Test Spot. The harder the paint the smaller the area you want to work.


    2. Moving the polisher too fast over the surface.
    For removing defects out of the paint you want to use what we call a Slow Arm Speed. It's easy and actually natural for most people new to machine polishing to move the polisher quickly over the paint but that's the wrong technique. One reason I think people move the polisher too quickly over the paint is because they hear the sound of the motor spinning fast and this has psychological effect which causes them to match their arm movement to the perceived fast speed of the polisher's motor.

    Another reason people move the polisher too quickly over the paint is because they think like this,

    "If I move the polisher quickly, I'll get done faster"

    But it doesn't work that way. Anytime you're trying to remove swirls, scratches, water spots or oxidation using a DA Polisher you need to move the polisher s-l-o-w-l-y over the paint.



    3. Using too low of speed setting for removing swirls.
    When first starting out many people are scared of burning or swirling their paint, so they take the safe route of running the polisher at too low of a speed setting but this won't work. The action of the polisher is already g-e-n-t-l-e, you need the speed and specifically the pad oscillating and rotating over the paint as well as the combination of time, (slow arm speed), together with the abrasives, the pad aggressiveness, and the downward pressure to remove small particles of paint which is how your remove below surface defects like swirls or scratches.

    Removing below surface defects is a leveling process where you need the abrasives to take little bites out of the paint and to get the abrasives to take these little bites with a tool that uses a Free Floating Spindle Bearing Assembly you need all of the above factors working for you including a high speed setting.



    4. Using too little downward pressure on the head of the polisher.
    For the same reason as stated in #3, people are scared, or perhaps a better word is apprehensive, to apply too much downward pressure to the polisher and the result of too little pressure is no paint is removed thus no swirls are removed.



    5. Using too much downward pressure on the head of the polisher so the pad quits rotating.
    If you push too hard you will slow down the rotating movement of the pad and the abrasives won't be effectively worked against the paint. You need to apply firm pressure to engage the abrasives against the paint but no so much that the pad is barely rotating. This is where it's a good idea to use a permanent black marker to make a mark on the back of your backing plate so your eyes can easily see if the pad is rotating or not and this will help you to adjust your downward pressure accordingly.

    Correct technique means finding a balance of applying enough downward pressure to remove defects but not too much downward pressure as to stop the rotating movement of the pad.

    This balance is affected by a lot of factors like the lubricity of the product you're using, some compounds and polishes provide more lubrication than others and this makes it easier to maintain pad rotation under pressure.

    Another factor that can affect pad rotation are raised body lines, edges and curved surfaces as anytime you have uneven pressure on just a portion of the face of the pad it can slow or stop pad rotation. This is where experience comes into play and experience comes from time spent behind the polisher.



    6. Not holding the polisher in a way to keep the pad flat while working your compound or polish.
    Applying pressure in such a way as to put too much pressure to one edge of the pad will cause it to stop rotating and thus decrease abrading ability.



    7. Using too much product or using too little product.
    Too much product hyper-lubricates the surface and the result is that abrasives won't effectively bite into the paint but instead will tend to skim over the surface. Overusing product will also accelerate pad saturation as well increase the potential for slinging splatter onto adjacent panels.

    Too little product will means too little lubrication and this can interfere with pad rotation.

    Again there needs to be a balance between too much product and too little product and finding this balance comes from reading articles like this one, watching videos an most important, going out into the garage and putting in time behind the polisher and as you're buffing with specific product and pad combinations, pay attention to pad rotation.



    8. Not cleaning the pad often enough.
    Most people simply don't clean their pad often enough to maximize the effectiveness of their DA Polisher. Anytime you're abrading the paint you have two things building up on the face of your buffing pad,
    • Removed paint

    • Spent product


    As these to things build up on the face of the pad they become gummy and this has a negative affect on pad rotating plus makes wiping the leftover residue on the paint more difficult. To maintain good pad rotation you want to clean your pad often and always wipe-off any leftover product residue off the paint after working a section. Never add fresh product to your pad and work a section that still has leftover product residue on it.


    Pad Cleaning Articles

    Why it's important to clean your pads often...

    How to clean your foam pad on the fly

    How to use the Grit Guard Universal Pad Washer


    Tyler, age 15 machine applying a paste wax using a Porter Cable 7424XP Dual Action Polisher







  2. #2
    Super Member dougaross's Avatar
    Join Date
    Aug 2010
    Location
    Pittsford NY
    Posts
    1,591
    Post Thanks / Like

    Re: DA Polisher Trouble Shooting Guide

    Useful info. Always good to remind people of proper technique.
    Doug
    2008 Audi A6 S-line

  3. #3
    Mike Phillips
    Guest

    Re: DA Polisher Trouble Shooting Guide

    Quote Originally Posted by dougaross View Post
    Useful info. Always good to remind people of proper technique.
    This is actually a re-write of an article I wrote a few years ago on MOL. It's been updated and hopefully improved.



  4. #4
    Super Member
    Join Date
    Jan 2011
    Posts
    421
    Post Thanks / Like

    Re: DA Polisher Trouble Shooting Guide

    Thanks, Mike, for the always informative and useful tips you give. I had to work through just about all the problems you mentioned. (Not that I think I'm an expert now, I'm still trying to refine my techniques.) I'm looking forward to the day in the future when I can come down to Florida and attend AG's detailing classes.

  5. #5
    Mike Phillips
    Guest

    Re: DA Polisher Trouble Shooting Guide

    Quote Originally Posted by JSMet View Post
    Thanks, Mike, for the always informative and useful tips you give. I had to work through just about all the problems you mentioned. (Not that I think I'm an expert now, I'm still trying to refine my techniques.) I'm looking forward to the day in the future when I can come down to Florida and attend AG's detailing classes.
    Hope to see you here in the future...

    We go over all of the above in the Detailing 101 Class.



  6. #6
    Super Member Dr Oldz's Avatar
    Join Date
    Aug 2010
    Location
    NE PA
    Posts
    4,462
    Post Thanks / Like

    Re: DA Polisher Trouble Shooting Guide

    Man....I thought this was gonna be a thread on how to change brushes and such.
    Jim

  7. #7
    Mike Phillips
    Guest

    Re: DA Polisher Trouble Shooting Guide

    Quote Originally Posted by Dr Oldz View Post
    Man....I thought this was gonna be a thread on how to change brushes and such.

    Sorry to let you down...


    One comment on this thread on MOL was to include this trouble shooting guide with every DA Polisher sold... I thought that was a pretty good idea to help ensure your customers that don't hang out on forums have a guide to check themselves against if they run into problems.



  8. #8
    Super Member Dr Oldz's Avatar
    Join Date
    Aug 2010
    Location
    NE PA
    Posts
    4,462
    Post Thanks / Like

    Re: DA Polisher Trouble Shooting Guide

    Quote Originally Posted by Mike.Phillips@Autogeek View Post
    Sorry to let you down...


    One comment on this thread on MOL was to include this trouble shooting guide with every DA Polisher sold... I thought that was a pretty good idea to help ensure your customers that don't hang out on forums have a guide to check themselves against if they run into problems.



    That is actually a great idea! Users guide to DA polishing.
    Jim

  9. #9
    Mike Phillips
    Guest

    Re: DA Polisher Trouble Shooting Guide

    Quote Originally Posted by Dr Oldz View Post
    That is actually a great idea! Users guide to DA polishing.
    Probaby not going to happen but on Autogeek.net they include the links to the how-to book and DVD's on the topic.

    Also, there are two more DVD's being made and shipped and should be available soon...



    E-book
    (Displayed on iPad - iPad not included)


    Paperback



    How to Properly Use the Porter Cable 7424XP Dual Action Polisher Updated!



    Pinnacle Complete Car Care System Instructional How-to DVD



    Mike Phillips' The Art Of Detailing Audio Book



    Mike Phillips' Principles of Machine Polishing





  10. #10
    Super Member
    Join Date
    Mar 2012
    Posts
    412
    Post Thanks / Like

    Re: DA Polisher Trouble Shooting Guide

    glad I read this thread, I am sure my results will be much better now

Page 1 of 3 123 LastLast

Similar Threads

  1. Trouble Shooting Grit Guard Pad Washer
    By mk9750 in forum Hot topics & Frequently Asked Questions
    Replies: 6
    Last Post: 06-09-2020, 09:20 AM
  2. 3M Foam Pads with DA Polisher (Compatible?) + Your detailing guide
    By MartyK in forum Ask your detailing questions!
    Replies: 15
    Last Post: 05-05-2020, 09:10 PM
  3. Cquartz classic removal trouble shooting
    By JChastain in forum Products Guides
    Replies: 4
    Last Post: 08-25-2017, 09:14 PM
  4. Trouble Shooting BMW M-Coupe Wheel Defects
    By Ohio Detailing in forum Auto Detailing 101
    Replies: 16
    Last Post: 09-15-2013, 09:42 PM
  5. suggesting new forum section: trouble shooting on job
    By thebamboo23 in forum Customer Comments
    Replies: 4
    Last Post: 05-07-2013, 01:49 AM

Members who have read this thread: 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» March 2024

S M T W T F S
2526272829 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31 123456