Show Car Garage Video: How To Apply A Carnauba Finishing Wax By Hand With The Straight-Line Technique

[Mike Phillips]

Show Car Garage Video: How To Apply A Carnauba Finishing Wax By Hand Using The Straight-Line Technique

Copyright ©PBMA - AutogeekOnline.net® All Rights Reserved

Part 1 - How to apply a Carnauba Wax by Hand using the Straightline Technique

Part 2 - How to apply a Carnauba Wax by Hand using the Straightline Technique

Visit Autogeek's YouTube Channel for more YouTube Videos

Also incudes...

• How to use a Brinkmann Swirl Finder Light
• The proper technique for removing a paste wax out of a can or jar
• How to "Break the wax open" to gently start the wax removal process
• How to use "The Final Wipe Technique" to give the paint a slow, careful final wipe

Screenshots




How to use a Brinkmann Swirl Finder Light





The right way to remove a paste wax out of a can or jar






The WRONG way to remove a paste wax out of a can or jar




The "Straight-Line Technique"



How to "Break Open" a layer of wax or paint sealant





Mmmm.... smells good too!







Products Showcased in Video
Pinnacle Souveran Paste Wax
Cobra Indigo Microfiber Polishing Cloth
Brinkmann Maxfire Dual Xenon Rechargeable Swirl Finder Spotlight
Pinnacle Foam Wax Applicator



Further Resources
How-To Videos
Articles I've Written

[sydster]

Great Video as usual Mike! Keep up the awesome work you're doing.

[Dubbin1]

He used a combination of straight-line motions and overlapping circular motions but mostly straight-line motions towards the end of his demo. It's usually easier to spread a product out using overlapping circular motions because you continually bring you pad back to where the largest concentration of product on the surface is and the from then move it out. In straight-line motions you tend to move across a panel moving away from where you first started, which is where you first touched your pad down and thus usually the highest concentration of product is on the surface.

Does that make sense?

That's the first time I've ever typed out an explanation for why overlapping circular motions work better for spreading a product out versus straight-line motions.

Now I'm confused on what you think is the better way to apply wax.

[C. Charles Hahn]

These videos are turning out great, Mike!

One thing that strikes me though: it's fairly obvious you've spent quite a bit of time around Barry Meguiar -- you have a very similar way of expressing things that I can't help but think rubbed off over the years

[agpatel]

Nice video, one thing if I could recommend anything would be to have lower res versions. Sometimes they take forever to load and buffer. But that has not much to do with this one but all of them. Would be helpful to people with lower broadband connections like I have at my apartment (1.5 Mb/s)

[Mike Phillips]

Now I'm confused on what you think is the better way to apply wax.

When you copy and paste a quote from another thread it can be helpful to include the link back to the thread so others can read the entire quoted passage in context of the discussion taking place. Just a suggestion but a practice I try to use when I do this on forums.


As to your comment, how you apply a wax or paint sealant by hand to your car's finish is personal preference, in this video, as well as this video,

Video: How To Apply A Synthetic Paint Sealant By Hand With The Straight-Line Technique


all I'm doing is explaining the what, why and how of using the Straight-Line Technique which is a technique that's been around long before I was born.

Numerous times on this forum and on any forum I post to when the topic comes up I prefer to use a DA Polisher to apply waxes and sealants. That's my personal preference.

I know some people like and even enjoy applying a quality paste wax by hand as it can be a relaxing way to escape and have some fun in your garage but my personal preference is to apply both waxes and paint sealants by machine.

If I can, I do everything by machine. For times when you can't use machine, then it's important to also possess good techniques for working by hand.

When it comes to applying a wax or paint sealant using an overlapping circular motion or straight-line motions, that comes down to personal preference. I do believe it's easier to spread a product out using overlapping circular motions but you can spread a product out using straight-line motions, you just have to be more focused on the task at hand... no pun intended...

[mcpp66]

Mike, is there a video for applying a paste wax by machine?

[Mike Phillips]

Mike, is there a video for applying a paste wax by machine?

Not yet but there's a lot of topics on the to-do list...

[Dubbin1]

When you copy and paste a quote from another thread it can be helpful to include the link back to the thread so others can read the entire quoted passage in context of the discussion taking place. Just a suggestion but a practice I try to use when I do this on forums.

Now thats some good constructive feedback
http://www.autogeekonline.net/forum/...tml#post303479

[Mike Phillips]

Now thats some good constructive feedback
http://www.autogeekonline.net/forum/...tml#post303479

I try to follow my own advice....