Re: From NEGLECTED to RESPECTED! 1985 Cougar Tunnel Hull Extreme Makeover at Autogeek
Quote:
Originally Posted by
Mike Phillips
My Sanger used a Casale V-Drive with 18% overdrive. Engine is a 402 BBC with small port closed chamber heads. Engine builder is Tim Briggs, means something in Oregon.
Carbs were 660 Center Squirters and Tim reground the linkage to make them progressive like a Double Pumper instead of all 8 barrels dumping at once. Some of you will know what this means.
Before modifying the linkage, when you put the pedal to the metal and all 8 barrels would dump at once, sometime the engine would backfire and it would throw a flame ball out the front of the scoop and past your ears.
Prop was a 17" pitch 2-blade - each time the prop makes one rotation it would propel the boat forward 17" - or that was the hope or theory.
:)
It takes special talent to run a flat bottom V Drive at speed. Working both the throttle and the cavitation plate at the same time requires guts, serious coordination, and a "feel" for the boat. Mike I know you paid a dear price but I appreciate the fact that you still miss your Sanger.
Re: From NEGLECTED to RESPECTED! 1985 Cougar Tunnel Hull Extreme Makeover at Autogeek
my dad has a boat, my buddy has a boat. everyone says don't buy a boat, use someone else, but this makes me want to find a discounted boat that needs some cosmetic tlc. Found one on craigslist even haha.
Re: From NEGLECTED to RESPECTED! 1985 Cougar Tunnel Hull Extreme Makeover at Autogeek
Quote:
Originally Posted by
Belo
my dad has a boat, my buddy has a boat. everyone says don't buy a boat, use someone else's
This is correct.
I worked on boats and on the water for almost 40 years. Don't do it. Lol
BOAT- Bust Out Another Thousand.
Definition of a boat: A huge hole in the water that you try to fill with cash.
Re: From NEGLECTED to RESPECTED! 1985 Cougar Tunnel Hull Extreme Makeover at Autogeek
More....
Before I took off for the Texas Roadshow Detailing Class I was doing garage laundry and took this picture. This shows how many pads we used to do the correction and polishing work to the Cougar Tunnel Hull.
http://www.autogeekonline.net/galler...oatPads_01.JPG
Today I put the foam pads away. Have not washed the wool pads yet.
I'm sharing this because from experience, I would say most people, most detailers included, don't know how many pads it takes to do this type of work. Here's a clue... it takes more than one pad.
:)
