Polish angel.... swirl help

[Juarec0201]

I just recently applied polish angel to the hood and sides a few weeks ago. Working in sections. I took my truck to get a bedliner installed and the company washed my vehicle. Well low and behold I have swirls on my new nano coating. All that work. Well I had applied two coats to it.

Now my question is how to go about polishing the swirls off. I believe the invincible primer has cutting abilities. Should I use that or megs 105 or 205. And lastly has anyone re coated the surface and how. Thanks again!

[Eldorado2k]

Man I'd be so upset if some shmuck did that to my vehicle..

[custmsprty]

Are you using Glasscoat Cosmic and if so v.1 or v.2?

[Juarec0201]

It's the V2, and yea nothing worse than picturing someone using a terry cloth or whatever on your vehicle.

[custmsprty]

I would do a test spot with Invincible and see how it comes out, you have to use it anyway as the base for Cosmic to work properly as it's a two part system. If you use Megs you will still need to do the two step with PA.

[Juarec0201]

ok so re polish with primer. Would it be ok to apply another cosmic coat after? thanks for the help

[281]

how long ago did you apply cosmic? say goodbye to cosmic once you re-polish with primer. after primer might as well apply 2 coats of cosmic...

[Juarec0201]

Maybe 2 weeks ago. Alright so basically I'm starting over again by re polishing and applying another coat. . Sucks

[custmsprty]

Maybe 2 weeks ago. Alright so basically I'm starting over again by re polishing and applying another coat. . Sucks

That is correct. You are starting over.

Did you ask them why the washed your truck?

[281]

Man that really sucks! Cosmic probably hasn't fully cured either. I've had Cosmic on my Mustang since Nov 2014, still holding up like a champ!