Suggestions for a new compound for me

[Mantilgh]

Ha, I feel like I asked if I should try HD Speed!

Which I haven't.

[FrankS]

Another vote for Fast Correcting Cream - nice fragrance too.

[The Guz]

Ha, I feel like I asked if I should try HD Speed!

Which I haven't.

Only if you need an AIO.

[Detailsbydaniel]

Thanks for the info everyone. That's some pretty good backing.

The Boss creams have a good price too!

The boss pads are nice come in a 2 pack in a nice sealed bag as well. They are not bad for the momey at all i must say. The entire boss system is very good quality. I think the polosher is a little less impressive than the rupes but it does hold its ground and the warranty is rather nice in case of failure.

[Billy Baldone]

Chop Top, HD Cut+

[osiapstndp]

Fast Correcting Cream is really something special in my experience. It finishes well, doesn't smell like industrial solvents (like Wolfgang Uber Compound and Menzerna FG400) and dusts minimally. It works extremely well with a Boss G15 and the Boss microfiber cutting pad.

I also use Fast Correcting Cream with a Flex 3401 and an orange Lake Country cutting pad. At high speeds the compound will eventually "explode" beneath the pad and shoot big, dried up granules of product all over whatever surface you're working on, but at speed four or lower it doesn't seem disintegrate so dramatically. Mixing Fast Correcting Cream with Meguiar's M205 significantly reduces this effect.

Correcting Cream (not the "fast" variety) works well too, but I always have difficulty removing it even after many section passes.

[VISITOR]

Fast Correcting Cream is really something special in my experience. It finishes well, doesn't smell like industrial solvents (like Wolfgang Uber Compound and Menzerna FG400) and dusts minimally. It works extremely well with a Boss G15 and the Boss microfiber cutting pad.

Christmas is coming up and i may treat myself to these...

[Mantilgh]

Thanks everyone for recommending GG's Fast Correcting Cream! It is lovely to work with!

Like most have said, it has a nice long working time, seems to cut and finish well, smells nice, and doesn't really dust. I did have it dust some using with a foamed wool pad, but I think I may have used to much though or I should have changed the pad out. Was just doing some spot correction with it before an AIO.

It really seems to work well with their BOSS Microfiber pad. These microfiber pads are also very nice and like someone else has said, they don't seem to get matted down like some others do.

Now I just the gallon of it to go on sale.

Thank again!!!

[B00st4ddicted]

Another vote for Griot's Boss Creams. Gets the job done quick and +1 for smelling good =D

[Every_detail]

I been thinking of trying fast correcting cream and also really want to try flattop from shine supply.