autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 

» Detailing Classes

New Dates Available for the Autogeek Roadshow!
Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27
  1. #21
    Senior Member
    Join Date
    Dec 2018
    Posts
    905
    Post Thanks / Like

    Re: 6in Orbital to 15mm

    Yeah I did my first polish /correction ever. My mustangs got a ton of curves. The G15 stall here and their but I would adjust (rotate) the head and she would kick right back in. Simple to use.

    I would highly recommend if your new and need polishing AND correcting skip an 8mm and by the 15. Works faster, way smoother than GG6. A lot will recommend to start with the an 8 mm

    Some post/article seem intimidating but truth is you’d have to mess up really bad to damage paint (sit on one place 20+ seconds).

    My recommendation though is for newer cars though. Have a nice amount of clear to work with. Long as you remember to keep moving all is well.


    Sent from my iPhone using Tapatalk

  2. Likes AaronE liked this post
  3. #22
    Member AaronE's Avatar
    Join Date
    Sep 2018
    Posts
    62
    Post Thanks / Like

    Re: 6in Orbital to 15mm

    Quote Originally Posted by Coatingsarecrack View Post
    Yeah I did my first polish /correction ever. My mustangs got a ton of curves. The G15 stall here and their but I would adjust (rotate) the head and she would kick right back in. Simple to use.

    I would highly recommend if your new and need polishing AND correcting skip an 8mm and by the 15. Works faster, way smoother than GG6. A lot will recommend to start with the an 8 mm

    Some post/article seem intimidating but truth is you’d have to mess up really bad to damage paint (sit on one place 20+ seconds).

    My recommendation though is for newer cars though. Have a nice amount of clear to work with. Long as you remember to keep moving all is well.


    Sent from my iPhone using Tapatalk
    Truth be told, after tackling a 3in rotary on my pillars without issue, I kind of regret my 21mm throw and wish I opted for a rotary 6in Orbital to 15mm I think as long as you keep it moving with the right pad and speed you'll be fine.



    Sent from my SM-G950U using Autogeekonline mobile app

  4. Likes Coatingsarecrack liked this post
  5. #23
    Senior Member
    Join Date
    Apr 2015
    Location
    PGH, PA
    Posts
    1,357
    Post Thanks / Like

    Re: 6in Orbital to 15mm

    Quote Originally Posted by AaronE View Post
    Truth be told, after tackling a 3in rotary on my pillars without issue, I kind of regret my 21mm throw and wish I opted for a rotary 6in Orbital to 15mm I think as long as you keep it moving with the right pad and speed you'll be fine.



    Sent from my SM-G950U using Autogeekonline mobile app

    If you ever decide to do rotary, go with the new Metabo
    Best you'll get for your $$$$

    Metabo PE 15-20 RT

  6. Likes AaronE liked this post
  7. #24
    Senior Member
    Join Date
    Apr 2015
    Location
    PGH, PA
    Posts
    1,357
    Post Thanks / Like

    Re: 6in Orbital to 15mm

    Quote Originally Posted by BSoares View Post
    I've never had issues with my G15 stalling. Works great.
    I very very rarely have with my G21 .
    My obersavation and experience is the 15mm always stalled more than the 21versions

    And end users technique on how well they readjust polisher to keep pad flat on panel curvatures is what dictates stall or power..

    Hell I don't have any issues stalling in curves with my 25mm CutForce with 5in BP

  8. Likes VISITOR, AaronE liked this post
  9. #25
    Member AaronE's Avatar
    Join Date
    Sep 2018
    Posts
    62
    Post Thanks / Like

    Re: 6in Orbital to 15mm

    Quote Originally Posted by Mike@ShineStruck View Post
    If you ever decide to do rotary, go with the new Metabo
    Best you'll get for your $$$$

    Metabo PE 15-20 RT
    I'll keep it in mind! I doubt I will though unless I take on a lot more work. The 21mm makes quick work of a car and mine doesn't vibrate too much.

    Sent from my SM-G950U using Autogeekonline mobile app

  10. #26
    Senior Member
    Join Date
    Apr 2015
    Location
    PGH, PA
    Posts
    1,357
    Post Thanks / Like

    Re: 6in Orbital to 15mm

    Quote Originally Posted by AaronE View Post
    I'll keep it in mind! I doubt I will though unless I take on a lot more work. The 21mm makes quick work of a car and mine doesn't vibrate too much.

    Sent from my SM-G950U using Autogeekonline mobile app
    Griot correct?
    It likes a lighter pad with the 6in plate
    You could most likey balance better with a 5in pad and a heavier pad..
    I can play around with weights and balance for ha..willing to bet it'll like a 35gram 5.5 pad

  11. #27
    Member AaronE's Avatar
    Join Date
    Sep 2018
    Posts
    62
    Post Thanks / Like

    Re: 6in Orbital to 15mm

    Quote Originally Posted by Mike@ShineStruck View Post
    Griot correct?
    It likes a lighter pad with the 6in plate
    You could most likey balance better with a 5in pad and a heavier pad..
    I can play around with weights and balance for ha..willing to bet it'll like a 35gram 5.5 pad
    Mines a lot like the Griots. But I haven't had an issue with stalling to need to look into a solution. I doubt I will except maybe in the Ram 1500 and a couple spots on the plane; but at that point, I'll just grab my GG6 with the 5in plate and use it.

    Sent from my SM-G950U using Autogeekonline mobile app

Page 3 of 3 FirstFirst 123

Similar Threads

  1. Detailing Class - FLEX XFE7-15mm Free Spinning Orbital Polisher
    By Mike Phillips in forum Pictures from Autogeeks 3 Day Detailing Classes with Mike Phillips
    Replies: 2
    Last Post: 04-06-2018, 02:40 PM
  2. The FINISHER - Updated FLEX XFE7 15mm Orbital Polisher
    By Mike Phillips in forum Ask Mike Phillips your detailing questions!
    Replies: 5
    Last Post: 11-17-2016, 08:46 AM
  3. What's in the box? FLEX Free Spinning XFE 7-15 150 - 15mm Orbital Polisher!
    By Mike Phillips in forum Product Reviews by Mike Phillips
    Replies: 15
    Last Post: 04-24-2016, 02:15 AM
  4. New Flex Tool XFE 7 - 15mm Long Stroke Free Spinning Orbital Polisher
    By Mike Phillips in forum Product Reviews by Mike Phillips
    Replies: 89
    Last Post: 03-15-2016, 12:26 PM
  5. Look what came today! NEW FLEX XFE 7 15mm Large Stroke Free Spinning Orbital Polisher
    By Mike Phillips in forum Ask Mike Phillips your detailing questions!
    Replies: 25
    Last Post: 02-18-2016, 09:29 PM

Members who have read this thread: 90

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» June 2019

S M T W T F S
262728293031 1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 123456