Dislikes: 0
-
Super Member
Re: Flex 3401
Originally Posted by Dr Oldz
Don’t be so hasty buddy. I just got the new Supa Beast. It’s definitely more ergonomic, quiet, touch smoother and no hot metal shroud to deal with.....I miss the extra power from the Beast. While some claim it is marginal, it matters to me. That marginal amount adds time, while not much, compound that over a years worth of details.
I suggest to buy a backup 3401 over the new machine.
While I am a huge Flex fan, I personally feel the new replacement has fallen a hair short. They fixed many issues and the new model is fantastic.... but I’m a speed guy...... I feel the need....THE NEED FOR SPEED!!!
I heard both, the noise they make, the newer one has a higher pitched sound, I wouldn't be able to stand that personally.
-
Re: Flex 3401
Originally Posted by Dr Oldz
but I’m a speed guy...... I feel the need....THE NEED FOR SPEED!!!
I hear you on the speed, here's what I wrote in May of this year,
FLEX Power Tools Nicknames - All cool tools should have a nickname - not a part number -Mike Phillips
Specifically, post #3
Originally Posted by Mike Phillips
Continued....
Some people have asked or wondered about the differences between the 3 different version of the original 8mm gear-drive BEAST.
BEAST = 480 RPM and 9,600 OPM
Supa BEAST = 430 RPM and 8,600 OPM
CBEAST = 380 RPM and 7,600 OPM
Here's my take on the above 3 gear-driven tools
The BEAST
If I REALLY want to bust out a job and plow through it as fast as humanly possible I use the BEAST.
The Supa BEAST
If not trying to hit Warp Speed - I grab the Supa Beast, much more enjoyable to use. Amazing tool. Smoother, quieter, lighter and cooler than the original.
The CBEAST
If I have an easy job, that means the car has only light swirls, scratches, etc. and I'm not in a hurry then I grab the CBEAST.
I too am all about speed, as in how fast can I plow through a car.
That said, I still find myself grabbing the new Supa BEAST with a 6" backing plate more and more for the 4 new benefits over the 50 more RPM of the older BEAST.
One thing for sure...
ITS NICE TO HAVE CHOICES
-
Super Member
Re: Flex 3401
This,
The Flex 3401, all brawl no stall!
Still love mine!
-
Re: Flex 3401
Originally Posted by Dr Oldz
I suggest to buy a backup 3401 over the new machine.
And on the above recommendation.
FLEX is going to DISCONTINUE the original BEAST within the next 2 years. (approximately)
So if you want a BEAST - you better get one while the getting is good.
-
Re: Flex 3401
Originally Posted by vobro
Flex 3401, all brawl no stall. Still love mine
That's good. I would say it like this though,
The BEAST! all BRAWL no STALL!
I may borrow this for the future when I sign my FLEX book.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Flex 3401
Originally Posted by Mike Phillips
Congratulations!
And this is why I call it the BEAST!
Zero pad stalling and once you invest some hours behind the tool you can truly make it dance on paint.
Finished up the Jeep today, the 3401 really cuts down the time spent on the paint compared to the G110V2 I was using.
I would say it cut my time about in half from what I was used to.
The pads not stopping is a massive time saver really.
It just powers right on through it, and it's nice to be able to use the edge and or 1/2 of the of the pads and still have the down pressure, big time saver right there.
-
Super Member
Re: Flex 3401
Originally Posted by Rsurfer
Cordless?
HELL NO! I am not interested in a cordless machine. My 3401 is older but keeps working just fine. Replaced brushes and that's all it's needed. My only complaint against the 3401 is the heat it can generate when correcting a bad paint. I sure hope the new one is better for that.
-
Super Member
Re: Flex 3401
Originally Posted by vobro
Flex 3401, all brawl no stall. Still love mine
What a great quote!!!!
-
Re: Flex 3401
Originally Posted by jankerson
I would say it cut my time about in half from what I was used to.
The pads not stopping is a massive time saver really.
Yup. This is why I go gear-driver orbital.
Buffing out a car already takes a long time. Gear-driven orbital enables you to do the work as fast as humanly possible while still putting out swirl-free, pro quality results.
Originally Posted by jankerson
It just powers right on through it, and it's nice to be able to use the edge and or 1/2 of the of the pads and still have the down pressure, big time saver right there.
Yup again...
Edging with the FLEX 3401 at one of our detailing classes
How to use the Flex 3401 to remove swirls & water spots
Note the hand positions for this type of work - my getting away from holding the front of the tool - I can more easily see the contact area of the pad to not only keep the pad where I want it - but also keep it away from where I don't want it - the edge of a panel.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Flex 3401
Love my Flex! Been using it for quite a while (7+ Years)! Love it. It's definitely showing some signs of wear and tear but it still ROCKS! One day, I may buy another.
But welcome to the Flex crowd! KEEP ON ROCKING!
CJ
2013 Mustang GT w/Track Pack 6-Speed Manual
Save the Manual!
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
Similar Threads
-
By IID in forum Flex Polishers
Replies: 18
Last Post: 11-11-2017, 04:35 AM
-
By DETAILROOKIE in forum Auto Detailing 101
Replies: 36
Last Post: 05-25-2017, 10:49 AM
-
By UglyBetty in forum Auto Detailing 101
Replies: 9
Last Post: 10-17-2013, 05:20 AM
-
By MichaelD in forum Boat & Marine Craft Detailing
Replies: 1
Last Post: 10-16-2012, 01:28 AM
-
By Grifftech in forum Auto Detailing 101
Replies: 12
Last Post: 08-29-2012, 02:44 PM
Members who have read this thread: 1
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks