Thanks: 0
Likes: 0
Dislikes: 0
-
Super Member
Re: FLEX XFE7-15 150 Unboxing/FLEX picture comparison
Nice purchase, Mike! I was really on the fence on whether to get one of these, or the Rupes 15. I ended up with the Rupes, simply because my cars are a bit more 'curvacious' than most and the 5.5" pads work better for me. If there was a 5" backing plate available, I would have went the other way. Please let us know how it works for you, so I can see how hard to kick myself
Street/Racing Concepts
'02 Mercedes SLK32 AMG, '05 Mercedes SL65 AMG, '02 Audi A6 Quattro 4.2- All Silver!
-
Super Member
Re: FLEX XFE7-15 150 Unboxing/FLEX picture comparison
Originally Posted by AZ Mike
We are all waiting for your review of this machine. Do you have any of the Rupes machines for comparison?
Although this is a nice machine. It is not in the same ballpark with the Rupes. Its a good 1st go with this machine, but from my understanding there is already work on the 2nd edition of this machine to bring up to match a little closer to the Rupes
Originally Posted by SRConcepts
Nice purchase, Mike! I was really on the fence on whether to get one of these, or the Rupes 15. I ended up with the Rupes, simply because my cars are a bit more 'curvacious' than most and the 5.5" pads work better for me. If there was a 5" backing plate available, I would have went the other way. Please let us know how it works for you, so I can see how hard to kick myself
Doesn't have the low end torque like the Rupes, but they are already working on the next edition of it
-
Super Member
Re: FLEX XFE7-15 150 Unboxing/FLEX picture comparison
Hope you enjoy your new Flex....Mike!
I want you to know your posts on Flex 3401 during AGO`s Promotion contributed to me needing no I had to have a Flex
I am looking forward to your honest detailed review of Flex XFE-15
-
Super Member
Re: FLEX XFE7-15 150 Unboxing/FLEX picture comparison
Yep...seriously considering selling the Boss 21 and getting one of these.
2015 F-150 Crew Cab Lariat
2016 Chevrolet Camaro 2SS
-
FLEX XFE7-15 150 Unboxing/FLEX picture comparison
Heard it's a bit weak compared to the Rupes Mark II.
-
Super Member
Re: FLEX XFE7-15 150 Unboxing/FLEX picture comparison
Originally Posted by WRAPT C5Z06
Heard it's a bit weak compared to the Rupes Mark II.
That would be a little discouraging. But on the other hand, it would keep me from adding it to my arsenal.
-
Re: FLEX XFE7-15 150 Unboxing/FLEX picture comparison
9000 opm? Just like the 3401 9600 opm? Lol.
-
Re: FLEX XFE7-15 150 Unboxing/FLEX picture comparison
Originally Posted by fly07sti
Very Nice! Can't wait to hear your thoughts after you've test driven it.
Thanks Don! Will do!
Originally Posted by AZ Mike
We are all waiting for your review of this machine. Do you have any of the Rupes machines for comparison?
Sure thing Mike. I do not own any RUPES tools.
Originally Posted by SRConcepts
Nice purchase, Mike! I was really on the fence on whether to get one of these, or the Rupes 15. I ended up with the Rupes, simply because my cars are a bit more 'curvacious' than most and the 5.5" pads work better for me. If there was a 5" backing plate available, I would have went the other way. Please let us know how it works for you, so I can see how hard to kick myself
Thank you! My cars are 'curvacious' as well and am interested to see how this setup performs. I hear a 5" plate will be released later on down the road.
Will share everything I can.
Originally Posted by JRP
Hope you enjoy your new Flex....Mike!
I want you to know your posts on Flex 3401 during AGO`s Promotion contributed to me needing no I had to have a Flex
I am looking forward to your honest detailed review of Flex XFE-15
Thank you good sir.
Thanks for that info. Sounds good. Excited to see how you make out.
Will do!
Originally Posted by DaveT435
Yep...seriously considering selling the Boss 21 and getting one of these.
-
Re: FLEX XFE7-15 150 Unboxing/FLEX picture comparison
Originally Posted by refreshauto
Although this is a nice machine. It is not in the same ballpark with the Rupes. Its a good 1st go with this machine, but from my understanding there is already work on the 2nd edition of this machine to bring up to match a little closer to the Rupes
Doesn't have the low end torque like the Rupes, but they are already working on the next edition of it
Does not make any sense whatsoever to start working on an "updated" machine when they just launched this one. As for this machine and improvements/additions the only thing I see is later on down the road the HD model with upgraded cord will launch, a 5" plate, and a reworked 230v machine for the rest of the world.
Other than that, the focus will be on launching the gear driven XCE at the end of the year.
-
Super Member
Re: FLEX XFE7-15 150 Unboxing/FLEX picture comparison
Congrats Mike! cant wait for your review my friend.
Kyle
Similar Threads
-
By MichaelD in forum Ask your detailing questions!
Replies: 5
Last Post: 03-11-2019, 07:49 AM
-
By Champion in forum Flex Polishers
Replies: 0
Last Post: 11-11-2018, 09:48 AM
-
By DETAILROOKIE in forum Auto Detailing 101
Replies: 36
Last Post: 05-25-2017, 10:49 AM
-
By Mike Phillips in forum Ask your detailing questions!
Replies: 9
Last Post: 02-15-2017, 06:24 PM
-
By postaltwo in forum Flex Polishers
Replies: 17
Last Post: 05-16-2016, 02:15 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks