autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 

» Detailing Classes

New Dates Available for the Autogeek Roadshow!
Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Junior Member
    Join Date
    Feb 2014
    Posts
    2
    Post Thanks / Like

    Amateur hour help needed

    Alright guys, long time lurker, first time poster.

    2014 blue wave pure bay. Payed to have it compounded/polished/ceramic coated (ceramic pro) and it came out awesome...for a week. About 7 days after the job was completed the boat looked horrible again. Brought it back, company re polished and coated the boat. A week later, same problem. Bring it back again, and this time they polish it but not coat it. I donít know if any of this makes a difference, but hereís where Iím at now.

    Ive started the process of compounding the boat myself, using my old faithful dewalt rotary (14years old now) 3m wool pads and presta compound (I like to shop local and nobody carries 31 marine)

    so far the results are awesome. Iíve done the gunwales all the way around and started on the casting decks. The issues Iím now having is on the non skid surfaces, the non skid consists of little tiny waves the essentially create grooves. Iím having a very hard time getting compound down into theseĒgroovesĒ, and an even harder time getting the dried compound back out. I am able to get the residue out with a microfiber and Meguiar detail spray, but itís taking forever having to do each little wave with my fingernail. And thereís thousands of them.

    Please throw some suggestions my way, Iím all ears. Iím well versed with a rotary and da, just havenít ever dealt with a non skid like this. Iím also worried that I may have gelcoat issues from the manufacturer since this boat wonít hold a shine for more than a week

  2. #2
    Director of Training Mike Phillips's Avatar
    Join Date
    Jun 2009
    Location
    Stuart, Florida
    Posts
    43,967
    Post Thanks / Like

    Re: Amateur hour help needed

    You don’t normally machine Compound molded-in non-skid for the 2 reasons you stated.

    In my boat classes I teach machine Scrubbing. You can use an APC or Marine 31 Mildew Remover or even Comet.

    Mike Phillips
    Director of Training Autogeek & Marine 31
    IDA Board Member - Certified Detailer - Skills Validated Detailer - IDA Recognized Trainer
    Mike Phillips Facebook Page
    Twitter
    Instagram
    Mike Phillips Detail Files YouTube Playlist
    Sign-up for Mike's Tips & Techniques Newsletter


Similar Threads

  1. Questions from an amateur
    By Valtex7 in forum Ask Mike Phillips your detailing questions!
    Replies: 2
    Last Post: 08-15-2018, 09:23 PM
  2. Replies: 13
    Last Post: 01-03-2018, 08:50 PM
  3. Is there a difference between $25/hour or $35/hour?
    By thebamboo23 in forum How to make money detailing cars
    Replies: 13
    Last Post: 11-05-2014, 04:50 PM
  4. Amateur here, need to update my arsenal
    By mrfjsw294 in forum Auto Detailing 101
    Replies: 3
    Last Post: 02-26-2008, 03:45 PM
  5. Amateur detailer from France
    By Zeers in forum Introduce Yourself
    Replies: 6
    Last Post: 09-13-2007, 03:58 AM

Members who have read this thread: 27

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» November 2019

S M T W T F S
2728293031 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30