Dislikes: 0
-
Super Member
Re: Blackfire One-step vs. Mckee's37 360 AIO
Originally Posted by ScottH
I have used both an my observations to date:
- Mckee's 360 has incredible durability. I did a friend's car - one that is ONLY cared for ONCE a year (when I do it). I was able to get just shy of 10 months durability before beading gave in. I see the car weekly and was pleasantly surprised how well it held up. McKee's 360 also does a nice job glossing the paint. Has good working time, but not quite as much as BF. One drawback, it stains pads. The only cleaner that would remove 360 was Mckee's polishing pad cleaner (the yellow powder you mix with water). Pads still don't come 100% clean so do as I do and dedicate some pads to 360. Dusts just a little but only after working it for a while. As far as smell goes, it's a mix of cherry smell combined with some light chemical smell. Not in any way offensive or hard to work with - and has a little stronger smell than the original 360 (when it was Pinnacle XMT 360 - which smelled like pure cherry candy).
- BF One-Step just did a black car with this and WOW it has amazing correcting ability for an AIO (has the most bite of any AIO I have used) and finishes down very well. It also left the paint really glossy and incredibly smooth. Has excellent working time - you could polish for 10 minutes and not dry out. Very little dusting, I mean VERY little. It too stains pads, but not quite to the extend of 360. I would call dusting a tie with 360. As far as durability, that I cannot comment on because I have not used this on either of my vehicles and none of the cars I've used it on have been back. As far as smell, it has a very pleasant coconut/pina coloda'ish smell - very easy to work with.
I would say whichever AIO you go with, dedicate a few pads to it. 360, BF and HD Speed all are pad stainers (to some extent). The only AIO that I have used that does not stain pads is Griot's Finishing Sealant. That cleans out of pads VERY easily.
Hope this helps,
ScottH
Sorry for a late reply, been busy with my parents. But I have a question about the pads staining.
Since 360 is staining the pads, do you think that some of the product is staying in them? Or, that it just the dye in it? I have always just used one brand for years and now since I am trying different products is why I am asking. I have always thought that if I cleaned them real good most, if not all would come out. But like anything, I'm sure some product will always linger.
Thanks
Last edited by Me Time; 10-11-2019 at 08:22 PM.
Reason: comma
-
Super Member
Re: Blackfire One-step vs. Mckee's37 360 AIO
Originally Posted by Me Time
Sorry for a late reply, been busy with my parents. But I have a question about the pads staining.
Since 360 is staining the pads, do you think that some of the product is staying in them? Or, that it just the dye in it? I have always just used one brand for years and now since I am trying different products is why I am asking. I have always thought that if I cleaned them real good most, if not all would come out. But like anything, I'm sure some product will always linger.
Thanks
My observation about 360 and BF One Step are that they give the pad a "gummy" feeling and that I have to rotate pads more often than the Griot's Boss cremes, or 3D polishes as examples. I've tried treating the pads immediately after use with a pad cleaning spray, and then ultimately soaking them in McKees pad cleaner (the yellow powder). Provided the water is warm enough, I find that a 30 min soak releases most of the product. The pads won't come completely clean but I would say 85%-90% comes out and that's plenty enough for a clean start the next use. Perhaps it's the combination of abrasiveness and protection in the product? Not sure but it doesn't in anyway stop me from grabbing 360 and BF AIO off my shelf on a very regular basis.
ScottH
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Blackfire One-step vs. Mckee's37 360 AIO
Originally Posted by ScottH
My observation about 360 and BF One Step are that they give the pad a "gummy" feeling and that I have to rotate pads more often than the Griot's Boss cremes, or 3D polishes as examples. I've tried treating the pads immediately after use with a pad cleaning spray, and then ultimately soaking them in McKees pad cleaner (the yellow powder). Provided the water is warm enough, I find that a 30 min soak releases most of the product. The pads won't come completely clean but I would say 85%-90% comes out and that's plenty enough for a clean start the next use. Perhaps it's the combination of abrasiveness and protection in the product? Not sure but it doesn't in anyway stop me from grabbing 360 and BF AIO off my shelf on a very regular basis.
ScottH
Thanks
Wonder if it could be the sealant in both of them. I think both polishes are water base. I know I have found out that using a couple of the sealant only products make the pads hard to clean.
-
Re: Blackfire One-step vs. Mckee's37 360 AIO
Originally Posted by Me Time
Sorry for a late reply, been busy with my parents. But I have a question about the pads staining.
Since 360 is staining the pads, do you think that some of the product is staying in them? Or, that it just the dye in it? I have always just used one brand for years and now since I am trying different products is why I am asking. I have always thought that if I cleaned them real good most, if not all would come out. But like anything, I'm sure some product will always linger.
Thanks
I have been using Blackfire One Step and have had no issues with pad staining or product remaining in the pads. I use Mckee's polishing pad cleaner (sold ready to use in a spray bottle) and it works great. I did try once to soak the pads in a microfiber wash to clean them and it didn't work well at all. I highly recommend the Mckee's cleaner. One bottle should last you 20-25 pads and saves alot of time.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Blackfire One-step vs. Mckee's37 360 AIO
Originally Posted by charliehaley
I have been using Blackfire One Step and have had no issues with pad staining or product remaining in the pads. I use Mckee's polishing pad cleaner (sold ready to use in a spray bottle) and it works great. I did try once to soak the pads in a microfiber wash to clean them and it didn't work well at all. I highly recommend the Mckee's cleaner. One bottle should last you 20-25 pads and saves alot of time.
Thanks.
I have some of each of the McKee's 37 cleaners and the APC from them. When I finally get a chance to do my Dad's T-bird, I will give them a try.
-
Super Member
Re: Blackfire One-step vs. Mckee's37 360 AIO
Originally Posted by Me Time
Thanks
Wonder if it could be the sealant in both of them. I think both polishes are water base. I know I have found out that using a couple of the sealant only products make the pads hard to clean.
No doubt it’s the sealant staining and making it harder to clean. I have this issue with any AIOs (some worse than others, maybe real durable ones are worse for obvious reasons??). I’ve also seen the issue with sealants back when I would use a pad to apply. Pure polishes clean extremely easily for me with pad cleaners.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Re: Blackfire One-step vs. Mckee's37 360 AIO
Di-limonene is what you guys need for your AIO pads. Whether you get it from Citrol, Citra-solv, or my new cheap favorite Citra-blast (There are many others.) you want about a 10 percent concentration.
I personally mix up a packet of Snappy Clean (McKee's same thing) in a 96 oz bottle (Because that's what I had. Otherwise, I probably would have put it in a gallon container). I pour an old Dish washing liquid container about 80 percent full of this mix and fill up with Citra-blast (Citra-blast is 50 percent Di-Limonene so this gives a 10 solution.) If you use one of the high 90's concentrate products like Citra-solv use half as much.
I have seen nothing else come close to how well this cleans AIO from pads. And its relatively cheap.
-
Super Member
Re: Blackfire One-step vs. Mckee's37 360 AIO
Will have to give this a try. While I was searching for Citra-blast, I even found how to make your own using vinegar and citrus peels. Wonder how that would clean with the vinegar mixed in?
Similar Threads
-
By Monster42 in forum Auto Detailing 101
Replies: 6
Last Post: 05-28-2020, 03:44 PM
-
By Mike Phillips in forum How to articles
Replies: 9
Last Post: 08-20-2019, 10:25 AM
-
By SwedishRider in forum Auto Detailing 101
Replies: 15
Last Post: 06-19-2018, 04:28 PM
-
By dcjredline in forum Product Reviews
Replies: 8
Last Post: 11-04-2015, 12:39 PM
Members who have read this thread: 1
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks