Pad storage

[timmy6262]

I don't have many pads but mine all fit in there just perfect for how many I have right now lol

Sent from my PH-1 using Autogeekonline mobile app

[Cruzscarwash]

I don't have many pads but mine all fit in there just perfect for how many I have right now lol

Sent from my PH-1 using Autogeekonline mobile app

What brand case is that? An are those 2x4s?

Sent from my Pixel 2 XL using Tapatalk

[timmy6262]

What brand case is that? An are those 2x4s?

Sent from my Pixel 2 XL using Tapatalk

Husky and I used 2x6s. The bottom isn't flat so I had to cut the corners off at a 45 degree angle or so and keep trimming until they slid into place. It works great everything actually stays in the intended section even when standing straight up and down. I figured something would move but nothing did.

Sent from my PH-1 using Autogeekonline mobile app

[timmy6262]

Husky and I used 2x6s. The bottom isn't flat so I had to cut the corners off at a 45 degree angle or so and keep trimming until they slid into place. It works great everything actually stays in the intended section even when standing straight up and down. I figured something would move but nothing did.

Sent from my PH-1 using Autogeekonline mobile app

https://www.homedepot.com/p/Husky-35...2167/205053257

Sent from my PH-1 using Autogeekonline mobile app

[ShinyGC]

I keep used pads in quart sized zip lock bags and then inside a lockable bin i bought at Walmart (roughly 14"x6"x6") One bin for just pads and the other holds my Griot's DA's (3", 6.5" and all the backing plates).

[Mantilgh]

I use plastic containers and coffee cans.

Here’s a pic from another thread I posted in.

My carrying bags for pads and applicators






Sent from my iPhone using Tapatalk

[Paul A.]

Love that idea Manty! I use a combination of plastic tubs with lids and KirkH's zippered clear plastic bags.

Hey AG...here's a good marketing idea. Develop round clear plastic tubes in various diameters for storing different sized pads. Substantial lengths too to store a bunch of pads. I'd like to mount them to my cart as well. You could even get fancy and fashion some type of dispensing mechanism at the bottom...kinda like a Pez dispenser. The trick would be to insure you only load fully dried pads.

Race ya guys to Shark Tank!

[Cruzscarwash]

I use plastic containers and coffee cans.

Here’s a pic from another thread I posted in.

My carrying bags for pads and applicators






Sent from my iPhone using Tapatalk

Yes!! What are the clear plastic ones??

Sent from my Pixel 2 XL using Tapatalk

[briarpatch]

Been looking for the same thing...something I could mount on the wall would be a nice feature.....looked at clear PVC....very pricey

[Cruzscarwash]

Been looking for the same thing...something I could mount on the wall would be a nice feature.....looked at clear PVC....very pricey

Very pricey!!

Sent from my Pixel 2 XL using Tapatalk