autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Junior Member Edi25's Avatar
    Join Date
    May 2017
    Posts
    79
    Post Thanks / Like

    G21 issues not turning on

    I've had my g21 for few months now maybe little under 6months I've probably only used 1 or 2 times for full correction since I'm always reaching for rupes or flex.
    Every so often I grab it to hit long hoods or top of cars .
    Point is the machine is not abused and has been well kept
    2 days ago I was using no problem till I notice the machine didn't turn on while I pressed it then slowly started turning and working as usual.
    I put the machine down maybe 5mins or so and grab it again but this time It did not turn on at all?
    Should I just contact griots or had anyone had this issue ?
    I want add that my extension cord and power source is fine I use my flex and rupes without issues for hours



    Sent from my iPhone using Autogeekonline mobile app

  2. #2
    Super Member Joe@NextLevelDetail's Avatar
    Join Date
    Jun 2015
    Posts
    1,929
    Post Thanks / Like

    Re: G21 issues not turning on

    Check the brushes.

    The brushes are very easy to check/replace.

    On the side of the polisher you will see 2 black plastic caps. Unscrew it with a dime and check if the brushes need tocbe replaced.

    Your unit comes with replacement brushes and are very easy to replace.

    Sent from my LG-LS777 using Autogeekonline mobile app

  3. #3
    Regular Member
    Join Date
    Jun 2013
    Location
    Omaha,Ne
    Posts
    150
    Post Thanks / Like

    Re: G21 issues not turning on

    Have you tried not using the extension cord? plug it right into the wall and see if that works for you if not my guess would be a switch went bad.

  4. #4
    Junior Member Edi25's Avatar
    Join Date
    May 2017
    Posts
    79
    Post Thanks / Like

    Re: G21 issues not turning on

    Quote Originally Posted by Joe@NextLevelDetail View Post
    Check the brushes.

    The brushes are very easy to check/replace.

    On the side of the polisher you will see 2 black plastic caps. Unscrew it with a dime and check if the brushes need tocbe replaced.

    Your unit comes with replacement brushes and are very easy to replace.

    Sent from my LG-LS777 using Autogeekonline mobile app
    Cool I'm going check them out when I get chance I didn't think of that


    Sent from my iPhone using Autogeekonline mobile app

  5. #5
    Junior Member Edi25's Avatar
    Join Date
    May 2017
    Posts
    79
    Post Thanks / Like

    G21 issues not turning on

    Quote Originally Posted by Robbiek View Post
    Have you tried not using the extension cord? plug it right into the wall and see if that works for you if not my guess would be a switch went bad.
    Yes I plugged them in directly and still nothing


    Sent from my iPhone using Autogeekonline mobile app

  6. #6
    Super Member mwoywod's Avatar
    Join Date
    Apr 2016
    Posts
    881
    Post Thanks / Like

    Re: G21 issues not turning on

    I am 99% sure it's the brushes. The same thing happened to my g15 about 6 months ago. I put in new brushes and it hasn't happened again.

    If you look at the brushes and you see a U shape that has worn into the carbon then I guarantee they just need to be replaced. Good luck!!

    I ordered two extra sets of brushes from griots to have on hand for when I wear them down again.

  7. #7
    Junior Member Edi25's Avatar
    Join Date
    May 2017
    Posts
    79
    Post Thanks / Like

    Re: G21 issues not turning on

    Quote Originally Posted by mwoywod View Post
    I am 99% sure it's the brushes. The same thing happened to my g15 about 6 months ago. I put in new brushes and it hasn't happened again.

    If you look at the brushes and you see a U shape that has worn into the carbon then I guarantee they just need to be replaced. Good luck!!

    I ordered two extra sets of brushes from griots to have on hand for when I wear them down again.
    Awesome looks like I can't save myself a call to griots
    Do brushes usually wear off that fast tho?
    My rupes is my work horse and seem to be running fine at all times with out any sign of wearing out


    Sent from my iPhone using Autogeekonline mobile app

  8. #8
    Super Member mwoywod's Avatar
    Join Date
    Apr 2016
    Posts
    881
    Post Thanks / Like

    Re: G21 issues not turning on

    You're right about Rupes, I haven't had any issues with the brushes on my rupes bigfoot polisher.

    I think it's more or less an issue specific to Boss Polishers. I use my boss polisher daily and a set of brushes last me around 5-6 months. Hope that helps.

  9. #9
    Super Member DaveT435's Avatar
    Join Date
    Jun 2012
    Location
    Arlington Texas
    Posts
    3,982
    Post Thanks / Like

    Re: G21 issues not turning on

    The screws that hold the brushes in loosened up on mine and it did something similar. Brushes are always the first thing I check.
    2015 F-150 Crew Cab Lariat
    2016 Chevrolet Camaro 2SS

  10. #10
    Super Member VISITOR's Avatar
    Join Date
    May 2007
    Posts
    9,689
    Post Thanks / Like

    Re: G21 issues not turning on

    unfortunately, no man made tool is going to be perfect and sometimes things happen. yes, even rupes has had their share of problems too (for example check out the DW site). hopefully it's something minor like the brushes being loose or just need to be replaced. if you can't figure it out to no avail, call GG and see what they recommend in trouble shooting. it's got a lifetime warranty and their customer service is top notch and will make things right no matter what the situation/problem is...

    btw, customer service is a huge factor when i buy a product. if you have crappy or non existent customer service, i don't care how good your product is, i won't support or buy your product if i can help it. i'm not going to put my hard earned money into someone's pocket if they don't appreciate their customers...

Similar Threads

  1. No turning back now…
    By onebad82z in forum How to make money detailing cars
    Replies: 11
    Last Post: 06-13-2011, 01:34 PM
  2. turning someone into an autogeek
    By timaishu in forum Auto Detailing 101
    Replies: 5
    Last Post: 05-20-2011, 05:37 AM
  3. Someone is turning 30 today!
    By Meghan in forum Off-Topic
    Replies: 12
    Last Post: 02-24-2008, 08:21 AM
  4. Somebody's turning 40 . . .
    By NorahCRV in forum Off-Topic
    Replies: 33
    Last Post: 07-28-2007, 10:03 PM
  5. Turning 18 today!
    By ryandamartini in forum Off-Topic
    Replies: 24
    Last Post: 11-29-2006, 08:25 PM

Members who have read this thread: 0

There are no members to list at the moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» March 2024

S M T W T F S
2526272829 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31 123456