How to get dried compound off of black trim?

[rob_v]

Hello all,
Did my truck the other day, my daughter was holding my polisher and paddled it quick. I didnt notice at the time, but it flung some very small dots of m205 across the tonneau cap I have on the bed as well as the black trim on the wheel well.
I wiped it off, but after a day or so, it seems to come back.

Any ideas?
Thanks
-Rob

[asianisafish]

Alcohol works

[Formula1_AC@NYC]

Isopropyl alcohol diluted with water works best.

Vegetable oil (and elbow grease) has also been known to lift that residue.

[Mike@ShineStruck]

I hear mineral spirits does too
But i could be wrong

[VeloNYC]

Optimum Power Clean APC and toothbrush

[Muddyoldgoat]

APC and Magic Eraser.

[MDX Detailing]

I've liked strong apc mixture, mothers hd trim cleaner, and scrub brushes.

[The Guz]

APC or Mother Back to Black Trim Cleaner.

[roguegeek]

If it's pretty fresh, you can reactivate it with water or a quick detailer and pull it off. If it's not, isopropyl alcohol diluted with water at 1:1 is what I use to remove almost anything.

[StangFan25]

APC or Mother Back to Black Trim Cleaner.

That's what worked for me as well. Mothers B2B works great!