Thanks: 0
Likes: 0
Dislikes: 0
-
Coatings Pros and Cons
Hi Guys,
As per the subject line, your views, pros and cons of coatings, personal experiences most welcomed.
-
Super Member
Re: Coatings Pros and Cons
Well let's see here I have installed all of the following coatings:
Opti-coat
Opti-gloss
Cquartz UK
Gtechniq C1
Gtechniq EXO
Gtechniq Cystal Serum
22ple
Pinnacle Black Label (the entire line)
DP coatings (the entire line)
Few unreleased ones and few in the waiting.
As you can see I have some time in coatings and they all are different in the way they are made up, the way you apply them, and the way you take car of them after the install.
When deciding in a coating, if this will be your first trip down coating lane you need to ask yourself what are you looking to get out of the coating?
With today's market there are too many company's trying to jump on the coating train so you want to choose a company that has been in the game and has a great track record. Additionally when picking a coating since this maybe your first time you want one that is fairly easy to install as well.
Here is what I fell are my rose for coatings:
Offer a clean, glossy, and just detailed look for a longer length than a wax/sealant
Some coating offer more scratch resistance than the traditional clear coat that is currently on the vehicle.
They help to reject objects like contamination, road paint, tar, and dirt for example from sticking or attaching to the surface of the vehicle
It acts as an additional layer of clear coat preserving the already thin clear on the vehicle. This allows the coating to take the beating to so to say from the outside world instead of the cars clear coat
They offer easy maintenance routines after the coating is installed
They offer very hydrophobic surfaces
Coatings have the potential to offer a higher resell value to a car
Those are just a few and those will vary slightly depending in the coating.
The cons:
Some coatings are a bit more difficult to install properly than other and can cause streaking and Hugh spots to remain if missed. This will result in a non-uniform look. Fixing these issues requires polishing off the coating.
The coatings are not bullet proof meaning they can and will scratch if they are not properly maintained
If you have to fix an area that is coating you may have to polish and re-coat an entire panel
Some coatings will last longer than others
As you can see the pros definitely out weigh the cons.
-
Re: Coatings Pros and Cons
Thanks for the comprehensive reply Evan, was very informative.
-
Super Member
Coatings Pros and Cons
I'll add a couple things to evan's comments.
1. They require intensive surface preparation prior to application. Be prepared, very prepared, before you start and don't rush the prep. Any defect left in the paint will be visible through the coating and you'll have to live with it or redo that panel
2. Even with top notch maintenance expect to polish and reapply in a couple years due to wash induced marring/swirls.
3. If you like waxing your car, forget about doing a coating, with the exception of reload, permanon and 22ple final coat, you really should not apply anything on your coating.
4. If you ever want to change things back to wax/sealant, you will need to polish to remove the coating.
One con Evan did not mention is that they are very expensive compared to durable sealants.
-
Re: Coatings Pros and Cons
Good counter argument, is the swirls/marring you talk about on the coating only yeah? That makes it worthwhile as the coating takes the beating not the clearcoat.
-
Re: Coatings Pros and Cons
From a consumer and enthusiast perspective. I have nothing but good things to say.
-
Super Member
Re: Coatings Pros and Cons
Originally Posted by Rick72
From a consumer and enthusiast perspective. I have nothing but good things to say.
My first try at a coating was DP.
-
Super Member
Re: Coatings Pros and Cons
Originally Posted by Zubair
Good counter argument, is the swirls/marring you talk about on the coating only yeah? That makes it worthwhile as the coating takes the beating not the clearcoat.
My statements weren't simply cons; certainly a couple are, but mostly trying to illustrating the unique nature of coatings.
I would consider swirls and marring to be shallow enough to be only in the coating, making the coating a sacrificial barrier as Evan suggested. Again, illustrating that you will have to redo the work eventually. overall you are probably spending fewer hours in the long run with a coating.
At least one manufacturer has openly stated not to clay their coating, one would hope the coating prohibits bonded surface contamination, but I feel this is unlikely in real world use, so therein lies a problem with that particular coating.
Deeper scratches that are likely to arise over the course of a couple years could be problematic in that you may find yourself redoing a panel or two sooner.
-
Super Member
Re: Coatings Pros and Cons
The biggest con is that to many people think they are bullet proof and to many installers do not educate their customers.
-
Super Member
Re: Coatings Pros and Cons
Originally Posted by Pureshine
The biggest con is that to many people think they are bullet proof and to many installers do not educate their customers.
And it's not even the marketing department, which I, admittedly, like to blame for misinformation. Except for that one coating under a manufacturer's "bullet proof" line of products, that I will blame on the marketing department.
I see this more like poor assumptions by consumers and poor education by some installers.
I just can't call a consumer's lack of knowledge a con. However, poor education by installers is certainly a con. And poor education by some manufacturers is a con as well.
Similar Threads
-
By skiwhmts in forum Auto Detailing 101
Replies: 15
Last Post: 06-05-2017, 06:02 PM
-
By parshooter in forum Auto Detailing 101
Replies: 5
Last Post: 02-17-2017, 12:25 PM
-
By My Detailing Guys in forum Auto Detailing 101
Replies: 7
Last Post: 08-20-2012, 07:11 AM
-
By My Detailing Guys in forum Off-Topic
Replies: 9
Last Post: 08-18-2011, 02:57 PM
-
By mini titan in forum Auto Detailing 101
Replies: 2
Last Post: 05-21-2008, 05:34 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks