Thanks: 0
Likes: 0
Dislikes: 0
-
Got my samples!
Thank you Totoland Mach.
Now I have XMT 2 and 3. When I use 3 do I have to follow it up with 2? Or can I go to wax or sealant? What spped setting do I use on the PC 7336? Thanks.
Kelly
-
Super Member
your gonna use the PC at full tilt (5-6) with any polish. I would follow up 3 (quite aggressive) with 2 as possible. Normally I would try 1 in 2's place, but I know you dont have it currently.
-
Super Member
Kelly: rule of thumb is start with the least aggressive product and check your results. I typically pick an area where the swirls are highly visible and start there. Let the product work, check the results, and make the decision to go more aggressive or stay with the product I'm using.
Totoland Mach
Similar Threads
-
By Redfireshaker06 in forum Autogeek's DetailFest Info
Replies: 6
Last Post: 03-22-2012, 01:22 PM
-
By 93fox in forum Customer Comments
Replies: 5
Last Post: 04-19-2011, 08:24 AM
-
By kvnkst in forum Off-Topic
Replies: 1
Last Post: 08-31-2010, 10:20 PM
-
By Finemess in forum Customer Comments
Replies: 5
Last Post: 06-08-2010, 07:48 PM
-
By nick19 in forum Auto Detailing 101
Replies: 20
Last Post: 01-30-2007, 02:07 PM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks