-
08-10-2018, 07:21 AM
#751
Re: Most regretted detailing product purchase
OT: Why the double post?
Bill
In dog beers, I've only had one.
-
08-12-2018, 06:46 AM
#752
Regular Member
Re: Most regretted detailing product purchase
Originally Posted by JFire72
I would have to say C.Quart UK 3.0 is at the top of my list. Spent a full day prepping the paint so I could apply it. Spent 2 days on applying it because there is a wait period in between coatings. Then waited 3 more days for the initial cure process before applying Reload on it so I could finally drive. I don't know if I had a bad batch or what, but it rained less than 24 hours after I had pulled it out of the garage. And it already stopped its hydrophobic action. So I did a maintenance wash, and reapplied the Reload again. I had the same results as before.
Unfortunately for me, I did it on my other vehicle too. Did same the process, and spent the same amount of time on it.
One day I may try a better product, but for now, I'm spent on ceramic coatings.
Sent from my SM-N950U using Tapatalk
I thought Reload should be applied within 1 hour of cquk? No?
Sent from my Mi A1 using Tapatalk
-
08-12-2018, 07:26 AM
#753
Junior Member
Re: Most regretted detailing product purchase
Originally Posted by PaulMys
"If one molecule of that crap hits this truck, you're in for a really, really bad day".
Hey, I think I like that line!
-
08-12-2018, 08:49 AM
#754
Junior Member
Re: Most regretted detailing product purchase
Originally Posted by Jon TDS
I thought Reload should be applied within 1 hour of cquk? No?
Sent from my Mi A1 using Tapatalk
From what I had read it didn't matter when it was applied as long as it was after the 24 cure period of the last application. I don't know maybe I did it wrong. There were so many different answers on how to do it out there. Of course, if I was using this forum back then, my answer would have been more straightforward.
Sent from my SM-N950U using Tapatalk
-
08-12-2018, 08:58 AM
#755
Regular Member
Re: Most regretted detailing product purchase
Yeah I haven't tried coating myself but from what I've gathered it should be applied within 1 hour window. But then again other people would have different methods too.
Sent from my Mi A1 using Tapatalk
-
08-12-2018, 09:48 AM
#756
Re: Most regretted detailing product purchase
I've posted this before, but I feel so ripped off that I feel the need to repost. CG Sprayable Leather is the worst. Shiny, squeaky, and slick. Complete crap.
-
08-12-2018, 12:29 PM
#757
Super Member
Re: Most regretted detailing product purchase
Regarding Cquartz UK, my understanding is that it's an hour IF you want some protection as the coating is curing. For example, if you have to send a customer car home after applying and it might get wet. I believe if you can't get it at one hour it needs to be at least 24 hours. When I did some testing I had coatings fail when not giving them enough cure time before getting wet. Cure time is also temp and humidity dependent. Unless it's hot out it seems like 24 hour is the absolute minimum cure time before getting them wet.
FYI, I had good results with Cquartz.
-
08-12-2018, 01:44 PM
#758
Super Member
Re: Most regretted detailing product purchase
Originally Posted by JFire72
I would have to say C.Quart UK 3.0 is at the top of my list. Spent a full day prepping the paint so I could apply it. Spent 2 days on applying it because there is a wait period in between coatings. Then waited 3 more days for the initial cure process before applying Reload on it so I could finally drive. I don't know if I had a bad batch or what, but it rained less than 24 hours after I had pulled it out of the garage. And it already stopped its hydrophobic action. So I did a maintenance wash, and reapplied the Reload again. I had the same results as before.
Unfortunately for me, I did it on my other vehicle too. Did same the process, and spent the same amount of time on it.
One day I may try a better product, but for now, I'm spent on ceramic coatings.
Sent from my SM-N950U using Tapatalk
You don't need to wait days in between additional coats. 45 min to 1 hour is what is recommended by CarPro. Also Reload can be applied 1 hour after the last coat of CQUK. It is recommended to wait at least 7 days before it gets wet or is washed. Reload is there to protect the coating in case it gets rained on sooner than later. I don't use Reload as it lacks the hydrophobics of Cquartz. But at the same time I am not too concerned with Rain as it does not rain here in Southern California.
What was your prep?
I have been enjoying CQUK 3.0 and and TiO2 and have been having very good results.
Originally Posted by Jon TDS
I thought Reload should be applied within 1 hour of cquk? No?
Sent from my Mi A1 using Tapatalk
Rippy got it correct.
Originally Posted by RippyD
Regarding Cquartz UK, my understanding is that it's an hour IF you want some protection as the coating is curing. For example, if you have to send a customer car home after applying and it might get wet. I believe if you can't get it at one hour it needs to be at least 24 hours. When I did some testing I had coatings fail when not giving them enough cure time before getting wet. Cure time is also temp and humidity dependent. Unless it's hot out it seems like 24 hour is the absolute minimum cure time before getting them wet.
FYI, I had good results with Cquartz.
Good point about coatings getting wet to soon.
-
08-12-2018, 02:36 PM
#759
Super Member
Re: Most regretted detailing product purchase
Guz serious question, 3.0 with gliss or the Ti02...which one di you prefer and why
Sent from my SM-G930V using Tapatalk
-
08-12-2018, 03:31 PM
#760
Super Member
Re: Most regretted detailing product purchase
Originally Posted by minerigger
It doesn't do anything. I applied it 2 consecutive days to ensure even coverage and it had over 24hrs to cure. Then the rain started and it had zero sheeting or beading properties. I have crazy amount of water spots and dirt seemed to stick worse....basically everything opposite of what I've heard, seen, read on the product
Sent from my SM-G930V using Tapatalk
Ah; I know - it must be contaminated - try Reset! Or... user error - 24 hrs? Maybe that’s when yr supposed FINISH applying the 2nd coat. If you START at 24 hrs - the whole thing is toast. That’s your problem.
What happens is - the nano bridges are too bi-polar to crosslink with the carrier solution which supports the retarding of the curing process. So, unless it’s topped with Reload v. 2.4a^4 - you’ll be left with water behavior that just doesn’t want to behave.
Of course, your paint is protected. You just need to apply Hydro2 to bring back the beading in each water spot... But, before you do that - clean up the coating with Echo, followed by Eraser, and a good Iron X snow foam. Be aware -using infrared heating lamps during this process may prematurely catalyze the SiO2 in the coating - in effect - making the whole process redundant...So, make sure the humidity is 76-78.5% if you’re using UK v.3. If not, you’ll need our newest version CQ Dubai v2.7 - which was specially formulated to harden in an ozone depleted environment on Lamborghini paint.
What polish did you use? You can only use Essence. Or, Essence +, or Super Essence +++. Or Ultimate Essence #1 +. One of those. I can’t recall. I’d email CarPro. They can clarify this ASAP. Your simply not following directions. Not the directions on the bottle (they’re BS) - but the uber super secret directions that are only mentioned by a guy on a forum via a post I can no longer find. Mods deleted it because it mentioned a brand of special coating towel they don’t sell.
Seriously though... regretful purchase - Master Blaster. A lot of redundant traditional soaps gathering dust. Griots Rubber Cleaner - wasn’t even worth it at BOGO. Meg’s Super Degreaser - couldn’t clean the oil off a salad bowl.
-
Post Thanks / Like - 1 Thanks, 4 Likes, 0 Dislikes
Similar Threads
-
By VISITOR in forum Auto Detailing 101
Replies: 233
Last Post: 10-04-2023, 01:30 AM
-
By allenk4 in forum Products Guides
Replies: 22
Last Post: 11-26-2015, 01:43 PM
-
By RJS5689 in forum Auto Detailing 101
Replies: 6
Last Post: 08-01-2013, 01:26 PM
-
By 94LT1 in forum Off-Topic
Replies: 5
Last Post: 06-15-2008, 05:11 PM
-
By ScottB in forum New Car Care Products
Replies: 13
Last Post: 04-27-2007, 09:55 PM
Members who have read this thread: 33
- Pats300zx,
- brianshaeffer,
- barryscott,
- chefwong,
- MoBenzOwner,
- 02whitetundra,
- mc2hill,
- Z28ImpalaSS,
- batb,
- hughfree,
- lee1dew,
- Setec Astronomy,
- vlamimc,
- Desertnate,
- Rupp250,
- Mike58,
- rmtaylor51,
- gregory1420,
- Texchappy,
- oneheadlite,
- Prange,
- explicitdetail,
- 4getgto,
- DFB,
- Dyerlog,
- Jackismydog,
- msharpe785,
- Alouminio,
- Silly Rabbit,
- Thunderchicken,
- Optimus Grime,
- thepaintingbuffalo,
- Welshdog
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks