-
Super Member
Re: Getting bugs out of clear bra?
Try using a heat gun. Hold the gun about 4" away from the area you're working on
“Hard times create strong men, strong men create good times, good times create weak men, and weak men create hard times.”
-
Regular Member
Re: Getting bugs out of clear bra?
Originally Posted by
Morphiusrt
I know rubbing alcohol is safe on paint but is like sandpaper to a clear bra so just be careful. Make sure to test a spot out of sight.
If you can find out the brand then you can contact the manufacturer and they will be more then willing to help you. My problem is mine came from a third party installer who uses different brands and they went out of business
I don't know why I had 2 bashing smileys not bashing you at all. I want to bash myself sometimes trying to clean this thing lol. I have thought of removing it a few times already.
-
Super Member
Re: Getting bugs out of clear bra?
I use stoners with the pressure washer and it usually does fine. Alcohol softens the bra which can help loosen, just be careful not to rub hard. Alcohol is a last case senerio.
-
Newbie Member
Re: Getting bugs out of clear bra?
I just tried the Hydrogen Peroxide method on my car- the results were immediate and appear to be fantastic. It's been overcast here for the past couple of days so I can't see if the surface of the ppm is impacted by the HP, but boy does it eat bugs off of it! I used HP on a q-tip, then gently applied over affected areas. Not the fastest method but it removed every single bug splatter. Thank you, thank you, thank you!
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Super Member
Re: Getting bugs out of clear bra?
Originally Posted by
LuvMyM2
I just tried the Hydrogen Peroxide method
on my car- the results were immediate and
appear to be fantastic.
I’ve had phenomenal success getting
embedded bugs out of Paint Protection
Film using XPEL’s Film Cleaner, or
PF1’s Film Cleanse. Of course: YMMV.
Bob
"Be wary of the man who urges an action in which he himself incurs no risk."
~Joaquin de Setanti
-
Super Member
Re: Getting bugs out of clear bra?
I have never seen that problem before but my one though was to use a microfiber cutting disk with a light polish or a cleaner wax... Any solvents on clearbra are bad ;(
-
Super Member
Re: Getting bugs out of clear bra?
Originally Posted by
Calendyr
I have never seen that problem before
but my one though was to use a microfiber
cutting disk with a light polish or a cleaner wax...
Any solvents on clearbra are bad ;(
When did light polishes or cleaner
waxes stop containing solvents?
Bob
"Be wary of the man who urges an action in which he himself incurs no risk."
~Joaquin de Setanti
-
Super Member
Re: Getting bugs out of clear bra?
Originally Posted by
FUNX650
When did light polishes or cleaner
waxes stop containing solvents?
Bob
Are you really comparing a wax to a pure solvent like Alcohol or Acetone?
-
Super Member
Re: Getting bugs out of clear bra?
Originally Posted by
Calendyr
Are you really comparing a wax to a
pure solvent like Alcohol or Acetone?
Of course not.
You implied that polishes and cleaner waxes
don’t contain solvents; and you’d be wrong.
Bob
"Be wary of the man who urges an action in which he himself incurs no risk."
~Joaquin de Setanti
-
Super Member
Re: Getting bugs out of clear bra?
Originally Posted by
FUNX650
Of course not.
You implied that polishes and cleaner waxes
don’t contain solvents; and you’d be wrong.
Bob
I have never seen any ill effect on clearbra from waxes or polishes. On the other hand, a little overspray from alcohol or body prep and you have to polish the clearbra out to remove the damage. Learned that one the hard way ;(
Bookmarks