HELP! How do you polish your roof (if you're short/car is tall)

**magna_power** · 06-06-2012, 10:54 PM

This may be a really stupid question, but I was after some safe/easy/cheap ideas on how to get me up to the right height to polish the roof of my car (polisher is on it's way!!!).

**Buckskincolt** · 06-06-2012, 11:15 PM

I have one of these
Costco - DURABENCH Two-in-One Workbench and Scaffold

**Frenchie** · 06-06-2012, 11:49 PM

Craftsman -Sit/Stand/Tote Truck

I have one of these. I weigh 250 pounds and it holds my weight no problem.

Hope it was OK I posted the linky....

**davey g-force** · 06-07-2012, 12:03 AM

I just use a small step which I purchased from a $2 shop. My car is not overly tall though...

**SonOfOC** · 06-07-2012, 12:34 AM

Get one or two of these. They are $29 when they go on sale.
Aluminum Work Platform TII (225 lb. Load Capacity)-AP-20 at The Home Depot

**Dugdug** · 06-07-2012, 12:54 AM

I like the werner platform. I got one last black friday for $20. Only thing is if you're not careful you can slip easily on it if it gets a little wet. I would put something down on it to avoid that lol I learned that that hard way.

**davidc11291** · 06-07-2012, 01:22 AM

I make my midget stand on my shoulders and polish the roof.....

Seriously, I'll flip a 5 gallon bucket upside down and stand on top of it, or open the doors, take my shoes off (so I don't mess up the interior I just cleaned), stand on the door jam, hold on with my left hand and use my right hand to run the DA. Can't do any real correction work or polishing using only 1 hand. You're only laying wax down, but it's the roof. As long as it's not horribly swirled beyond belief, I just want to put some wax on it as a protective measure.

I posted in a thread a month or so ago about this very same topic, and there was significant discussion about the very real dangers of slipping and falling or having the plastic bucket crack and break. A step ladder or scaffold is one of those things I'll get around to buying eventually..... It'll probably be the first thing I buy once I slip, fall, break my arm, and am out of work for 6 weeks.

**magna_power** · 06-07-2012, 02:52 AM

I used to stand on a recycling tub to wax my roof by hand, one day I slipped and my elbow hit the roof, made a dent, total FML moment.

So now that I'm getting a DA polisher I'd like to avoid reoccurrences, especially if I was to work on a friends car!

**magna_power** · 06-07-2012, 10:43 PM

Thanks to those who posted on this thread, I also found another thread on here that covered a similar (really the same but i didn't find it when i first searched) topic.

http://www.autogeekonline.net/forum/...n-suv-how.html