autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Super Member
    Join Date
    Sep 2011
    Posts
    354
    Post Thanks / Like

    Pinnacle XMT Polishing Pad Cleaner vs. Duragloss 501

    I used a white LC CCS pad to apply Duragloss 501 on my car today.

    I sprayed XMT PPC on the pad afterwards to clean it. I let it sit for 10 minutes, scrubbed with a brush and rinsed. Still lots of product oozing out when i wring it. I repeated 2 more times. Still lots of product in the pad.

    At this point, I sprayed it again and will let it sit over night.

    Was expecting something quicker/easier to use. I don't expect it to be white again, but I thought it would dissolve the product inside.

    I could let it soak overnight in solvent, but that would defeat the whole point of the XMT PPC spray. I could do that with any of the APC or Dawn that I already had.

    I am open to the possibility that I am approaching this incorrectly and welcome any suggestions.

    Thanks.

    Before:



    After (soaking with XMT):


  2. #2
    Super Member
    Join Date
    Oct 2011
    Location
    Colorado
    Posts
    674
    Post Thanks / Like

    Re: Pinnacle XMT Polishing Pad Cleaner vs. Duragloss 501

    I spray with XMT PPC and use a Foam Pad Conditioning Brush to scrub. I usually leave on polisher and use on moving pad. I let the pad sit for 5-10 min. Then I immediately put into hot water bucket for 5-10 minutes to soak. Most of the time I can squeeze out all the polish and cleaning solution in the water. Then rinse with fresh water. Worked great every-time!

  3. #3
    Super Member
    Join Date
    May 2009
    Posts
    4,837
    Post Thanks / Like
    Welcome to Duragloss my friend! It's very tough to clean out of pads, so basically dedicate that pad to DG 501. You can try a solvent.
    "Challenge yourself to live a better tomorrow than you did yesterday"

  4. #4
    Super Member alko's Avatar
    Join Date
    May 2011
    Posts
    4,342
    Post Thanks / Like

    Re: Pinnacle XMT Polishing Pad Cleaner vs. Duragloss 501

    When I'm polishing, I will spray a couple of shots on the pad with the pad cleaner and then use Mike's Cleaning Pads on the Fly technique. I will sometimes use a bad brush to clean residual polish. It works great for me.
    Alex
    ...."Do the right thing...even when no one is looking"

  5. #5
    Super Member richy's Avatar
    Join Date
    Mar 2007
    Location
    Windsor, Ontario
    Posts
    5,158
    Post Thanks / Like

    Re: Pinnacle XMT Polishing Pad Cleaner vs. Duragloss 501

    Just goes to show you how strong 501 really is!! Soak it in mineral spirits overnight.

  6. #6
    Super Member Capa1970's Avatar
    Join Date
    May 2011
    Location
    Jenks, Oklahoma
    Posts
    494
    Post Thanks / Like

    Re: Pinnacle XMT Polishing Pad Cleaner vs. Duragloss 501

    Quote Originally Posted by rwright View Post
    Welcome to Duragloss my friend! It's very tough to clean out of pads, so basically dedicate that pad to DG 501. You can try a solvent.
    +2 this is common with 501 and pads. All of my white pads are slightly greenish-blue.

  7. #7
    Super Member
    Join Date
    May 2009
    Posts
    4,837
    Post Thanks / Like
    Quote Originally Posted by richy View Post
    Just goes to show you how strong 501 really is!! Soak it in mineral spirits overnight.
    Since the cat is out of the bag, after soaking in mineral spirits wash with dish soap to dissolve the MS, rinse well.
    "Challenge yourself to live a better tomorrow than you did yesterday"

  8. #8
    Super Member
    Join Date
    Sep 2011
    Posts
    354
    Post Thanks / Like

    Re: Pinnacle XMT Polishing Pad Cleaner vs. Duragloss 501

    Quote Originally Posted by rwright View Post
    Since the cat is out of the bag, after soaking in mineral spirits wash with dish soap to dissolve the MS, rinse well.
    haha. i am reclassifying the pad as disposable.

Similar Threads

  1. Replies: 98
    Last Post: 06-26-2019, 06:14 AM
  2. Duragloss 501 and compounding/polishing
    By Mike Honcho in forum Auto Detailing 101
    Replies: 29
    Last Post: 02-24-2017, 12:59 PM
  3. Duragloss PC No2 : need for polishing agent after?
    By ymc226 in forum Auto Detailing 101
    Replies: 3
    Last Post: 06-03-2015, 08:06 PM
  4. Pinnacle XMT Polishing Pad Cleaner - Doesn't Work On Sealant?
    By NIS240SHU in forum Auto Detailing 101
    Replies: 10
    Last Post: 10-22-2012, 07:19 AM
  5. Review: Pinnacle XMT Polishing Pad Cleaner
    By RFulmer in forum Product Reviews
    Replies: 31
    Last Post: 12-19-2011, 02:59 PM

Members who have read this thread: 0

There are no members to list at the moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» April 2024

S M T W T F S
31 1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 1234