paint types?

[mikeg091578]

How do you guys know if you have hard or soft paints? I have a 2010 dodge ram. Thanks in advance

[Perfections]

How do you guys know if you have hard or soft paints? I have a 2010 dodge ram. Thanks in advance

The 2010 rams I've worked on have all been in the softer side

[mikeg091578]

what would you recommend for removing light swirls and rail dust. also pad recommendation also please. the truck is white so the rail dust stands out. i have a pc, optimum compounds, menzerna po106. thanks

[Perfections]

what would you recommend for removing light swirls and rail dust. also pad recommendation also please. the truck is white so the rail dust stands out. i have a pc, optimum compounds, menzerna po106. thanks

Haha all those trucks have rail dust on the tail gates, your gonna need clay for that, a medium clay is what I use for rail dust, but a fine clay can do it, just takes longer and if I'm claying a car I'm usually polishing it aswell, what kind of pads do you currently have?

[mikeg091578]

i bought a pc kit with lc ccs pads (orange,red grey,blue,green,) I currently looking to buy more stuff.any recommendations.

[Perfections]

i bought a pc kit with lc ccs pads (orange,red grey,blue,green,) I currently looking to buy more stuff.any recommendations.

Since most of your pads are finishing pads I would start with the least agressive approach, hit it with the 106 first with the orange pad, if thats not agressive enough opt compound it, same pad, and then finish that down with the 106 on the green pad, unless you have the coarse green, if thats the case use your grey. Just trying to use what you have. If that doesn't work I can always recommend spending more money lol but I usually stick with what you already have and trying to make that work first.

[mikeg091578]

thanks perfections for your time.

[Perfections]

NP man, anytime, if it doesn't work out repost on this topic, but what your have should work for swirls, gl