What should I use to measure 1 ounce?

[BobbyG]

I transfer my ONR to this container I got from US Plastics



Also, AG sell Problend bottle proportioners that work well with gallon and quart bottles.

One of my favorite methods too!

[RTexasF]

Oddly enough, a one ounce container seems to work quite well.

[photoadjuster]

I use a pumper top that replaces the regular top on one gallon containers. A full pump is one oz. There are also 3/4, 1/2,1/4 marks on the pump stem.

[Setec Astronomy]

I transfer my ONR to this container I got from US Plastics

I THOUGHT that US Plastics sold them, but someone on here asked about buying a bottle like that and I couldn't find it! Cheap, too.

[Setec Astronomy]

I bought these same (if not very similar) glasses at Meijer for like $1/each. They measure up to 4oz. in 1oz. increments.

Are those glass or plastic?

[WRAPT C5Z06]

The 1 ounce "cup" that comes with DP pad rejuvinator.

[Old Tiger]

I just bought these and used them, sure made things easy. One for gallons and one for quarts.
Pro Blend Bottle Proportioner Combo

Dave

I love the quart size, I have them for ONR, DP RW,MicroRejuvenator, and they are no spill, no mess! I dilute Car Wash 2 to 1 and dispense 3 oz into the bucket to get an ounce of wash. Dispenses easier for high viscosity washes. also great for diluting APC. Gallon size is too big IMO. The Home Depot $1 bottles work great with the QT Pro Blend. Ultima Concentrate comes in the 2 neck bottles shown above and are reusable. Another reason to love Ultima!

[dad07]

I THOUGHT that US Plastics sold them, but someone on here asked about buying a bottle like that and I couldn't find it! Cheap, too.

Setec you thought right you will find them in thier lab section . They have 8,16,32,oz range from 1.28-2.38

[LegacyGT]

I went the cheap route I cut off the bottom of a small bottle and marked the side at 2oz. But for a couple of bucks the shot glasses would make a great upgrade.

[CEE DOG]

I use a measuring cup