Paint Jeweling With WG [How to?]

[tWiStEd-tORqUe]

Recently i noticed alot of members talking about the Term "Paint Jeweling " so i searched it on AG to get a little Confused ,

Ill be Detailing My Car (2008 Golf R32) & My Friends (2008 Mazda Mx5)

and ill be Using Wolfgang System to make my Paint Correction

After Claying ill be Using TSR with the Orange LC CCS Pads
then follow up By WGFG on White LC Pad , after this i usally seal the Paint with WGPS , now from what i understood is " Paint Jeweling" comes before the sealant ,

My Questions Are ,

1- to Jewel the Paint should i use TSR or FG?
2- Which Pad to Use , ( I have Gray and Blue )
3- What is the Speed Setting should i work the Product in (Using PC7424)
4- What my Arm Speed should be? slow like using TSR or Mid like Using FG)

Cheers

[ScottB]

FG 3.0 using either a blue pad will work. This is after using the various pads and polish until paint is spectacular first. I still use the higher speed but no real pressure.

[OGauge4Me]

Yoy will be amazed at the difference in the paint finish. It is worth the extra time spent.

[tWiStEd-tORqUe]

Thanx Guys , ill post the out Come once Done