Help with wool pad selection for rotary

[alowe]

Good morning,

I am going to be ordering a Makita 9227 from here and need help with anything else I may need.

I already own a UDM with various Menz, and 3M products. I see the Makita already comes with 2 wool pads. I would like to have a few in reserve as backups if one becomes caked.

What are good pads to own (brand and type) to have for products with 1000, and 2000 grit to them (3m Finesse It, POS34A, PO83RD, PO106FF, Meg's #1, and #4).

I have an old 1969 Chevy truck hood that I will use to learn the new device, so I am not afraid to mess up.

Thank you for any responses.

[ASPHALT ROCKET]

3M makes very good wool pads, I personally haven't found better wool pads in over 20 years of using a rotary.

[robb01]

Another vote for 3M

[Pyrocite]

its its an original 69 paint its not the same as the new clearcoat on the new cars (i was told).

[GeorgiaHybrid]

Another here for good old 3M.

[alowe]

The hood is original paint. I also have a 2001 Accord, and a 2005 Jetta hood, that both have clear coat.

Where is the best place to order 3M pads? I have seen the 3m superbuff mentioned here, but what are good pads for compound and then polishing?

[ASPHALT ROCKET]

The superbuff II.

[alowe]

Thanks,

One more, I checked out 3M's site and there is 5 different pads (05700-05705). I see the polish pad is PN# 05705, I take it that would be good for say SIP and 106ff? Now there are 4 different buffing pads, what is a good one for use with power gloss?

[TOGWT]

For more information see the “Wool Pads” article on ############# website; a series of informative, knowledge based, unbiased articles dedicated to automotive detailing

[alowe]

For more information see the “Wool Pads” article on ############# website; a series of informative, knowledge based, unbiased articles dedicated to automotive detailing

Thanks mate! How are peoples thoughts on the Edge 2000 wool pads?