Looking for an All In One Polish, Help me Choose

[Larry A]

Any thing from Duragloss

[chinee]

This was the result I had Saturday with…

3D Speed
Flex 3401
LC Force Hybrid Orange

3 section passes with slow arm speed. F250 crew cab done in under two hours.

Smells good, works fast, and removes so easy I often grin with delight while I work. Forget all the other brands. 3D’s got the AIO mastered.




Sent from my iPhone using Tapatalk

I like the BF for ease of removal as well.

What would be a good topper for the 3D Speed? Durable and hydrophobic...

[chinee]

Sonax ceramic AIO, Sonax ceramic spray coating, maintain with Sonax ultra slick detailer

Will look into this. Thanks for the recommendation.

[dlc95]

Any thing from Duragloss

I like 101.

If I don't need the correction potential of 3D Speed or 505, 101 is great, and it holds up longer than any cleaner wax I've used to date.

[PBoy]

I'm going to try 3d Speed & 3D Bead It Up.

[Paul A.]

Sounds like you correct then apply an LSP. My new favorite combo is 3D One, thorough panel wipes and CanCoat Evo ceramic. Trouble free for 10 months to a year!

[chinee]

Sounds like you correct then apply an LSP. My new favorite combo is 3D One, thorough panel wipes and CanCoat Evo ceramic. Trouble free for 10 months to a year!

Yes... BF One Step (once yearly) followed by Sonax BSD, once every 2-3 washes. But looking for a change.

3D One seems too aggressive for me, maybe even 3D Speed.
I looked at the Sonax AIO and the label seems to indicate an agressive cut as well.

Made up my mind to search and watch some YouTube over the next few weeks to see what other users have experienced. And I'll probably do some more reading on this board as well. I think I got my work cut out for me.

[dgage]

Yes... BF One Step (once yearly) followed by Sonax BSD, once every 2-3 washes. But looking for a change.

3D One seems too aggressive for me, maybe even 3D Speed.
I looked at the Sonax AIO and the label seems to indicate an agressive cut as well.

Made up my mind to search and watch some YouTube over the next few weeks to see what other users have experienced. And I'll probably do some more reading on this board as well. I think I got my work cut out for me.

Those aren’t too aggressive but if you don’t need any correction ability and you’re just looking for max gloss and to clean the paint, one I’ve used in the past is P21S Gloss Enhancing Paintwork Cleanser. That is a very fine polish with minimal correcting ability but high gloss. CarPro Essence with a white gloss pad could also be used.

[noorth]

Yes... BF One Step (once yearly) followed by Sonax BSD, once every 2-3 washes. But looking for a change.

3D One seems too aggressive for me, maybe even 3D Speed.
I looked at the Sonax AIO and the label seems to indicate an agressive cut as well.

Made up my mind to search and watch some YouTube over the next few weeks to see what other users have experienced. And I'll probably do some more reading on this board as well. I think I got my work cut out for me.

No need to worry about polishing car paint a few dozen times with foam pads at least. So your talking over 10 years. With today's polishes you only need 2-4 passes.