-
Super Member
Re: New Opti-Coat Hyper Seal
Originally Posted by
bcwang
If it really is dead in 3 days no matter how you try to do the application, you should contact optimum and see if you got a bad bottle. No way a 1 yr sealant is going to last only 3 days and be dead in the first wash unless it’s defective.
I think everything is fine. I can't speak to durability yet. I put a 2nd coat on today. I think a more thorough panel wipe is what made the difference.
The only reason I've avoided a true coating is because I enjoy messing with these spray sealants. I'm getting closer though to trying a coating and will likely at some point.
-
Re: New Opti-Coat Hyper Seal
Last time you killed it, how did it bead during the pre spray? Was it already flat then?
-
Super Member
Re: New Opti-Coat Hyper Seal
Originally Posted by
bcwang
Last time you killed it, how did it bead during the pre spray? Was it already flat then?
No it wasn't entirely gone.
-
Super Member
Re: New Opti-Coat Hyper Seal
My question is why are you washing it so fast?
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: New Opti-Coat Hyper Seal
Just out of curiosity and to apply 2nd layer.
Sent from my iPhone using Tapatalk
-
Super Member
Re: New Opti-Coat Hyper Seal
I would give it a little longer to have the polymers and whatever little ceramic in it to cure a bit before washing it. A second layer with a spray sealant is not really needed.
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: New Opti-Coat Hyper Seal
After this layer I’m going to let it go for a while.
Sent from my iPhone using Tapatalk
Bookmarks