Menzerna 3 step process

[1981z28]

What finishing one compound should i get?

thanks

[98CayenneTA]

Start with this
Menzerna Heavy Cut Compound, Fast Gloss 400, FG400 compound

Finish with this
CarPro Essence Xtreme Gloss Enhancer 250 ml

[opie]

so you would start with this :

Medium Cut Polish 2400
Medium Cut Polish 2400 | menzerna polishing compounds GmbH & Co. KG

and end with this ?

Medium Cut Polish 2500 | menzerna polishing compounds GmbH & Co. KG

I'm so confused and there different stages

I appreciate all the help

I would go with menz 400(compound). Then go to menz 3500(ultra fine polish). These two are my go to. Amazing products imo

Sent from my SM-G973U using Tapatalk

[opie]

I dont know that i would use a microfiber cutting pad. 400 has some heavy cut. Try it with a lc hybrid force orange then a lc hybrid force white for the 3500.

Well thats if your using forced rotation machine. If not then maybe a micro pad.
Sent from my SM-G973U using Tapatalk

[98CayenneTA]

I dont know that i would use a microfiber cutting pad. 400 has some heavy cut. Try it with a lc hybrid force orange then a lc hybrid force white for the 3500.

Well thats if your using forced rotation machine. If not then maybe a micro pad.
Sent from my SM-G973U using Tapatalk

The damage to his vehicle in the picture's is pretty severe

[1981z28]

I would go with menz 400(compound). Then go to menz 3500(ultra fine polish). These two are my go to. Amazing products imo

Sent from my SM-G973U using Tapatalk

so you suggest this to start:

Heavy Cut Compound 400

Menzerna 400 | Heavy Cut Compound 400 for automotive clear coats | menzerna polishing compounds GmbH & Co. KG

and finish with this

Super Finish 3500
Super Finish 3500 | menzerna polishing compounds GmbH & Co. KG

[opie]

so you suggest this to start:

Heavy Cut Compound 400

Menzerna 400 | Heavy Cut Compound 400 for automotive clear coats | menzerna polishing compounds GmbH & Co. KG

and finish with this

Super Finish 3500
Super Finish 3500 | menzerna polishing compounds GmbH & Co. KG

Yes sir!

What machine are you going to be using?

98cayenneTA you are correct it does look pretty bad for sure...in that first picture atleast

Sent from my SM-G973U using Tapatalk

[wing commander]

I will say that this paint is to old and single stage if I read correctly. Any attempts at correcting the paint should be dedicated to preserving what is left of it.Meguiars #7 Show Car Glaze is a final step auto glaze to enhanced the gloss prior to wax application. Get a show car shine with Meguiars #7 Show Car This is what Mike Phillips showed us to use first on this type of original single stage paint. He instructed to put it on generously and let it soak in overnight in a garage. The next day apply a second coat generously on top of that and wipe off. Then follow with a good sealant. You will still have defects but you will still also have
shiny paint.

[1981z28]

I finally got around to Washing the car and clay baring it,

Like mentioned before the paint is far from perfect, I would like to eliminate some of the scratches, and get a deep shine,

I noticed on the roof and rear spoiler the paint is really faded

I have not bought any compounds / D/A polisher yet

[1981z28]