I also wanted to add that when I coated my Jeep, I coated the whole vehicle, and then buffed off the coating. I believe you have to give the product a little bit longer of a cure time to properly bond to the surface. This is why I've experimented with timed cure times between 2 to 5 minutes per panel.

I believe 5 minutes is a good cure time, or at least that's what I'm going with. The product will be harder to buff off, but at least you know its properly bonded.

Whatever time you choose to let it cure, just be sure it has cured to a WHITE HAZE.

Sent from my SM-G975U using Autogeekonline mobile app