What topper for AvalonKing Armor Shield?

[Jpetermann]

This will be my first ceramic coating. I am curious as to the topper that would work well with Armor Shield.
Does it need to be ceramic? I have TW Graphene Flex wax, would that be a good topper for it? Thanks!

[Bruno Soares]

I’m not sure anyone in this forum uses that coating to speak from experience. But any topper with SiO2 should be fine.

[Desertnate]

Agree you could probably top it with anything you want. If it is a quality coating (never heard of it before) than nothing should really effect it.

The only real question is why you are topping and what you hope to gain.

[Bruno Soares]

If it is a quality coating (never heard of it before)

It's a brand that pays most YouTube influencers to advertise their product and provide significant discount codes. I would not use it on my car. If I'm going through the trouble to prep the car for a coating, I might as well use something from a known and established brand.

[YMMV]

I have only heard of that brand from the automotive youtubers I follow but they are also sponsored by it. Its not a common brand used on these forums or even on some facebook groups AFAIK.

I would think any topper with si02 will work. You may want to contact them directly to confirm.

[Jpetermann]

Thanks for all the replies everyone. I am a bit of a noob in detailing, so maybe this is not THE best best or high end. I did watch and read a lot about it from posts over the last few years in different places. I will see how it works and go from there.

[FUNX650]

This will be my first ceramic coating.
I am curious as to the topper that
would work well with Armor Shield.

Does it need to be ceramic?

I have TW Graphene Flex wax,
would that be a good topper for it?

•If I was contending with this uncertainty
-I’d send an email directly to AvalonKing
asking for their recommendation(s).

By doing so, IMO, would prevent me
from possibly committing a violation
of: “The Law of Stacking”…YMMV.



Bob

[Jpetermann]

I messaged them and they said to use an si02 topper. They recommended:
Mother CMX, Adams Ceramic Detailer or Gyeon si02

Thanks again for all the replies

[FUNX650]

I messaged them and they said
to use an si02 topper.

They recommended:
Mother CMX, Adams Ceramic Detailer
or Gyeon si02

^^^ Eazy Peazy!




Bob

[Coatingsarecrack]

I messaged them and they said to use an si02 topper. They recommended:
Mother CMX, Adams Ceramic Detailer or Gyeon si02

Thanks again for all the replies

Reply back on what you think of it


Sent from my iPhone using Tapatalk