What pads to use with 3D One Hybrid?

[duffthebluff]

Hi everyone,

I'm a long time HD Speed user with LC Orange CCS pad. I'm planning to try the 3D One Hybrid Compound soon. What pads do you guys use for the 3D One Hybrid? Also want to hear from others if they have the same 3D One + LC CCS foam combo. Thanks!!

[Goonie75]

Hi everyone,

I'm a long time HD Speed user with LC Orange CCS pad. I'm planning to try the 3D One Hybrid Compound soon. What pads do you guys use for the 3D One Hybrid? Also want to hear from others if they have the same 3D One + LC CCS foam combo. Thanks!!

I love it with LC flat white pads. Does wonders. A bit more oily but worth it.

Sent from my SM-G965U using Autogeekonline mobile app

[Buster906]

Hi everyone,

I'm a long time HD Speed user with LC Orange CCS pad. I'm planning to try the 3D One Hybrid Compound soon. What pads do you guys use for the 3D One Hybrid? Also want to hear from others if they have the same 3D One + LC CCS foam combo. Thanks!!

With 3D One, I used Meguiars microfiber cutting pads. I had some swirling that did not stand up to 3D One.

Sent from my SM-N986U using Tapatalk

[crg001]

What machine are you using?

On my G9 and Makita PO5000C, I like Buff and Shine Uro-Tec pads. Buff & Shine Uro-Tec Foam Pad System

The yellow is good for softer paints, and the dark blue or even maroon for hard paint systems.

[WRAPT C5Z06]

It works especially well with microfiber pads. Most foam pads, too. The only pad I haven't had luck with it is the Rupes Yellow Wool pad(doesn't finish well).

[Mike Phillips]

What pads do you guys use for the 3D One Hybrid?

Depends on if I'm working on severely neglected paint or light/shallow defects.


The most recent car I detailed using 3D One was this old 2-door Dodge. Here's a picture of the pads I used. These are the next generation RUPES CP foam pads. Love these pads.


Removing Water Spots from Matte Vinyl Graphics on a Dodge Challenger Scatpack 392 Hemi



Paint wasn't in bad shape, wasn't great but wasn't bad.

Matte vinyl graphics were bad though.

[Mike Phillips]

About a year and 2 months ago I used it on and old 2-door Chevy. The swirls and scratches were light/shallow but the paint was rock hard.

For this paint I used the LC 6.5" Orange Force Hybrid Foam Cutting Pads - and lots of them. Followed by the same line of pad only the white polishing version.



Review: 3D Paint Coating and 3D One Cutting Compound and Finishing Polish

[dwaleke]

Hi everyone,

I'm a long time HD Speed user with LC Orange CCS pad. I'm planning to try the 3D One Hybrid Compound soon. What pads do you guys use for the 3D One Hybrid? Also want to hear from others if they have the same 3D One + LC CCS foam combo. Thanks!!

3D ONE and Buff And Shine Uro-Fiber Blend 50/50 pads are a very popular and effective combination (if you are using a free spinning DA).

I just used it on a 10 year old neglected SUV and one step corrected and finished very well. I see why this is such a popular combination.

[duffthebluff]

What machine are you using?

On my G9 and Makita PO5000C, I like Buff and Shine Uro-Tec pads. Buff & Shine Uro-Tec Foam Pad System

The yellow is good for softer paints, and the dark blue or even maroon for hard paint systems.

I'm using Flex 3401 AKA "The Beast" as Mike has coined it

[duffthebluff]

About a year and 2 months ago I used it on and old 2-door Chevy. The swirls and scratches were light/shallow but the paint was rock hard.

For this paint I used the LC 6.5" Orange Force Hybrid Foam Cutting Pads - and lots of them. Followed by the same line of pad only the white polishing version.



Review: 3D Paint Coating and 3D One Cutting Compound and Finishing Polish

Thanks as always Mike, I'm going to try this pad combo!