Thanks: 0
Dislikes: 0
-
Been away for 20 years and need guidance!
Hi everyone! Twenty years ago, I spent a lot of time detailing. I haven’t tried many new products since using my PC machine, Zaino, and the Klasse twins years ago. Life happened!(career, kids, etc) I just bought a 2021 Jeep Gladiator Rubicon and take delivery next Tuesday. I want to get started on a detail for the exterior surfaces including paint, black freedom hardtop, and the black plastic fenders and bumpers. I live in Pa so it will see treated roads in the winter. Can anyone offer some good products worth considering that are easy to use and offer a year of durability with occasional upkeep. It won’t see much garage time at first. Hopefully that will be resolved by winter. My initial plans were to do a clay bar, polish, and sealant like usual. However things have changed a lot and I’m a bit intimidated. Detailing used to involve a six pack, some shade, and some basic knowledge. Now I see people with latex gloves and a chemistry lab. Where do I start? Is ceramic the way to go?
-
Super Member
Re: Been away for 20 years and need guidance!
Welcome to AGO! It would be tough to get a year out of a sealant. Something like 303 graphene or a lite coating might be better options.
-
Re: Been away for 20 years and need guidance!
Look into the lite coatings - Gyeon CanCoat, CarPro CQuartz lite, etc. They are pretty close to what you describe.
-
Super Member
Re: Been away for 20 years and need guidance!
What's your budget to get back into the game?
-
Re: Been away for 20 years and need guidance!
Originally Posted by mwoolfso
What's your budget to get back into the game?
$200-300 including clay materials, 2-3 buffer pads, a few microfiber towels, and a better more compact foam cannon than the $20 one I bought off Amazon. My PC is still going strong after 20 years of abuse.
-
Super Member
Re: Been away for 20 years and need guidance!
There is no such thing as too many pads or towels. Definitely keep the Porter Cable and maintain the six pack and shade routine.
I believe in treating everybody with respect, and clean cars. That’s what I believe in.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Been away for 20 years and need guidance!
I'm with UncleDavy!
The only thing I'd do is get all Thin Pro pads for that PC. 6-8 of each color white, orange and some blue foamed wool or MF cutting and you're set.
Your new Jeep hopefully only needs clay and polish before your choice of LSP. Maybe an Iron decon too.
I've had good luck with Gyeon CanCoat as a quick 'n easy ceramic coating product. Gives me a good 7-8 months. I'd call it one of those coating "lite" products mentioned above but slightly more robust than some of the best sealants out there.
-
Re: Been away for 20 years and need guidance!
Originally Posted by Paul A.
I'm with UncleDavy!
The only thing I'd do is get all Thin Pro pads for that PC. 6-8 of each color white, orange and some blue foamed wool or MF cutting and you're set.
Sounds like a plan for the polishing set up. If your foam canon is working then I’d save money there too.
-
Super Member
Re: Been away for 20 years and need guidance!
i agree with all the great suggestions above. IMO coating hands down. best protection, ease of cleaning is far above all other LSP's.
Little suggestion if i may...you say you are in PA, as am i. since this is a brand new vehicle and you say it may see winter roads, i highly suggest undercoating your jeep with Fluid Film. cheap and very effective at protecting the underneath.
What good is a well maintained paint surface if its rusting from the inside out? i do all my vehicles...even ones that don't see the salt due to spending their life outside.
-
Super Member
Re: Been away for 20 years and need guidance!
Originally Posted by Brett K
$200-300 including clay materials, 2-3 buffer pads, a few microfiber towels, and a better more compact foam cannon than the $20 one I bought off Amazon. My PC is still going strong after 20 years of abuse.
You will eventually need more than just 2-3 pads and while I have more questions for you such as paint condition of your vehicles (along with forum rules taken into account), best approach would be a good compound such as Menzerna FG400, and an AIO like Pinnacle Jeweling Wax, Blackfire AIO, Wolfgang Uber AIO, Duragloss AIO lines are top of the list. Instead of a spray wax get onboard with a drying aid/sealant that you apply after a wash and before you dry the vehicle - as you would get 2-3 months out of that type of LSP. If you want less maintenance on the LSP I have had great experiences with Optimum Car Wax.
Similar Threads
-
By Krohnj94 in forum How to make money detailing cars
Replies: 5
Last Post: 02-21-2017, 09:33 PM
-
By kc's in forum Show N' Shine
Replies: 7
Last Post: 08-02-2015, 11:30 AM
-
By mbret2004 in forum Flex Polishers
Replies: 6
Last Post: 06-19-2013, 06:45 PM
-
By Scooter89 in forum Auto Detailing 101
Replies: 6
Last Post: 02-24-2009, 05:40 PM
-
By TNT-C5 in forum Auto Detailing 101
Replies: 3
Last Post: 09-09-2006, 08:30 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks