autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Super Member Lance Mark's Avatar
    Join Date
    Mar 2021
    Posts
    357
    Post Thanks / Like

    He offered to fly me to Pittsburgh :)

    I thought this was kinda funny, I'm pretty green.

    Some of you may have noticed that I'm new here and learning about the world of detailing. I'm a member of a couple of bike forums and I shared a before and after pic of a quarter panel I did on a truck.

    A fella got all excited, sent me a pic of his '14 Cadillac and asked if he could fly me out to detail his car!!

    I immediately encouraged him to find a more experienced detailer in his area.

    As folks are hearing that I'm getting into this, I am being propositioned, and I don't even have plans of doing this for money. I'm an HD enthusiast, here to learn how to better care for my sled.

  2. #2
    Super Member Bruno Soares's Avatar
    Join Date
    Mar 2017
    Location
    Southeastern PA
    Posts
    2,480
    Post Thanks / Like

    Re: He offered to fly me to Pittsburgh :)

    That will only get worse, all your friends and family will start giving hints they'd like you to do their cars. It's up to you how to proceed, I normally tell them they can't afford me and they leave me alone. It's too much of a PITA to do, I do my car but not because I like it, I just do it because the results are worth it. But I don't want to do the same to other people's car, I know a week later they'll take it to the swirl inducing tunnel and mess it all up again.

    Only other car I've worked on is my brother's Porsche, mainly because it's a nice car. His car was a good start as it had been corrected and coated by a pro in the past.
    Bruno Soares


  3. Likes PaulMys, MIsnowman liked this post
  4. #3
    Super Member Lance Mark's Avatar
    Join Date
    Mar 2021
    Posts
    357
    Post Thanks / Like

    Re: He offered to fly me to Pittsburgh :)

    i don't know that I would want to do it for money, but I'd have to think it would be a nice gift if I wanted to bless a friend a family member

  5. #4
    Mike Phillips
    Guest

    Re: He offered to fly me to Pittsburgh :)

    Quote Originally Posted by CaffeineBuzz View Post


    A fella got all excited, sent me a pic of his '14 Cadillac and asked if he could fly me out to detail his car!!


    Go with it!

    Here's some free advice. If you end up getting deep into the "detail thing" - change your forum nickname.

    See my article here,


    Brand Yourself, Brand your Forum Nickname and Brand your Business Name



    Wow!

    Hard to believe I wrote that 11 years ago as I type today on March 31st, 2021



  6. #5
    Super Member Icarus's Avatar
    Join Date
    Oct 2019
    Location
    Ontario, Canada eh!
    Posts
    269
    Post Thanks / Like

    Re: He offered to fly me to Pittsburgh :)

    My neighbors hint at me all the time how much would it cost for me to do their vehicles. I won't do it though, just family and some friends... It's nice compliment to hear though that they think its good work
    ·Ï¢årµ§·

  7. #6
    Super Member PaulMys's Avatar
    Join Date
    Jan 2014
    Location
    Eastern L.I. NY
    Posts
    10,773
    Post Thanks / Like

    Re: He offered to fly me to Pittsburgh :)

    Quote Originally Posted by BSoares View Post
    That will only get worse, all your friends and family will start giving hints they'd like you to do their cars. It's up to you how to proceed, I normally tell them they can't afford me and they leave me alone. It's too much of a PITA to do, I do my car but not because I like it, I just do it because the results are worth it. But I don't want to do the same to other people's car, I know a week later they'll take it to the swirl inducing tunnel and mess it all up again.
    ^^This^^

    There are parts of the detailing process that I like, but to be quite honest there are more parts that are just a pain in the a$$.

    But liike Bruno said, it is well worth the effort.

    I'm not jumping up and down with joy when I have to mow the lawn, but I'm not going to let my grass grow to 2 feet tall and make my property look like crap either. I think of detailing kind of the same way. Lol
    It is no coincidence that man's best friend cannot talk.

  8. Likes custmsprty, Bruno Soares, DetailKitty liked this post
  9. #7
    Super Member 98CayenneTA's Avatar
    Join Date
    Aug 2020
    Location
    Minnesota
    Posts
    593
    Post Thanks / Like

    Re: He offered to fly me to Pittsburgh :)

    You guys are nuts, I go to bed dreaming about detailing (multi stage corrections, NO INTERIORS)

    Constantly analyzing vehicles in traffic, parking lots ect.
    Ripping through your mind like a hurricane full of novocaine

  10. #8
    Super Member PaulMys's Avatar
    Join Date
    Jan 2014
    Location
    Eastern L.I. NY
    Posts
    10,773
    Post Thanks / Like

    Re: He offered to fly me to Pittsburgh :)

    Quote Originally Posted by 98CayenneTA View Post
    You guys are nuts, I go to bed dreaming about detailing (multi stage corrections, NO INTERIORS)

    Constantly analyzing vehicles in traffic, parking lots ect.
    Lol. You have no clue.

    Actually, machine polishing probably my favorite part because I am a "tool guy".
    It is no coincidence that man's best friend cannot talk.

  11. #9
    Super Member MIsnowman's Avatar
    Join Date
    Jun 2015
    Posts
    332
    Post Thanks / Like

    Re: He offered to fly me to Pittsburgh :)

    Quote Originally Posted by BSoares View Post
    That will only get worse, all your friends and family will start giving hints they'd like you to do their cars. It's up to you how to proceed, I normally tell them they can't afford me and they leave me alone. It's too much of a PITA to do, I do my car but not because I like it, I just do it because the results are worth it. But I don't want to do the same to other people's car, I know a week later they'll take it to the swirl inducing tunnel and mess it all up again.

    Only other car I've worked on is my brother's Porsche, mainly because it's a nice car. His car was a good start as it had been corrected and coated by a pro in the past.
    I agree. I’ve been approached many times in the parking lot at work (back when I actually went to the office) asking where I had my truck detailed. When I told them I did it myself the next question was usually how much to do their vehicle. I tell all of them that I only do my own vehicles and don’t really have the time to do others.

    The only other vehicles I detail regularly are my dad’s trucks, which are both black F150 Supercrews (four door). They take a lot of time, but he loves the way they look afterwards and gets tons of compliments on them so it’s worth it. I gave him strict instructions never to take them through the swirl-o-matic washes, so they usually stay in pretty good shape between polishes.

  12. Likes Bruno Soares, PaulMys liked this post
  13. #10
    Super Member Coatingsarecrack's Avatar
    Join Date
    Dec 2018
    Posts
    7,157
    Post Thanks / Like

    Re: He offered to fly me to Pittsburgh :)

    Yeah i get asked how i keep my cars so shiny and i’ve been lying and say i go to a detailer. Had alot of friends asked me to do it and it’s funny cuz it’sxa hobby on my car and a chore on others.


    Sent from my iPhone using Tapatalk

Page 1 of 3 123 LastLast

Similar Threads

  1. M16 offered for me to buy it
    By RPM_BR in forum Auto Detailing 101
    Replies: 14
    Last Post: 06-24-2016, 04:22 PM
  2. Wash tool needs to be offered by AG
    By Hoytman in forum Auto Detailing 101
    Replies: 20
    Last Post: 04-27-2016, 07:33 PM
  3. Best Towel currently offered for wax/sealant removal
    By suprachica79 in forum Auto Detailing 101
    Replies: 2
    Last Post: 04-07-2011, 05:45 PM
  4. Aquapel offered by Simoniz?
    By DaHen in forum Off-Topic
    Replies: 10
    Last Post: 04-06-2011, 06:33 AM
  5. Smaller, thinner LSP finnesse pad for PC? Would you like to see one offered?
    By dengood1 in forum Auto Detailing Tools and Accessories
    Replies: 9
    Last Post: 02-11-2007, 12:11 PM

Members who have read this thread: 0

There are no members to list at the moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» April 2024

S M T W T F S
31 1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 1234