Which Paint sealant for my truck

[Coatingsarecrack]

If looking for great bling over great protection (has good protection though.... Gyeon Cancoat. IMO looks better than CQUK3 and easier to apply.

No flash time just apply and wipe off. Should get 9-12 month in AZ


Sent from my iPhone using Tapatalk

[Bladegunner]

If looking for great bling over great protection (has good protection though.... Gyeon Cancoat. IMO looks better than CQUK3 and easier to apply.

No flash time just apply and wipe off. Should get 9-12 month in AZ


Sent from my iPhone using Tapatalk

Coatings,
Thanks for the input, protection is not super important as it is garaged 98% of the time and the really only harsh weather we have is the sun here in Southern Nevada (Las Vegas) pretty much the same as AZ only a little less humid.

If I put the WG Si02 on I assume it will need to be polished off before applying Cancoat in say 4 to 6 months or can it be removed with Car Pro Eraser?

[Rsurfer]

Coatings,
Thanks for the input, protection is not super important as it is garaged 98% of the time and the really only harsh weather we have is the sun here in Southern Nevada (Las Vegas) pretty much the same as AZ only a little less humid.

If I put the WG Si02 on I assume it will need to be polished off before applying Cancoat in say 4 to 6 months or can it be removed with Car Pro Eraser?

They are both SiO2 so I don't see why they are not compatible. No, Eraser would not have removed WG.

If the next coating you are using calls for a clean surface the only way to remove the existing coating is to use a polish.

[acuRAS82]

If I put the WG Si02 on I assume it will need to be polished off before applying Cancoat in say 4 to 6 months or can it be removed with Car Pro Eraser?

I think you would be OK using CanCoat in 4-6 months. WG will be weak by then. I wouldn’t polish, that’s going to remove your coating! Give it Reset wash for a few weeks prior or a coating prep wash one time, and/or Eraser just to get the old, dying LSP remains off and then I think Cancoat is ‘unpicky’ enough to do well.

[Coatingsarecrack]

Is it wolfgangs actual coating or sio2 spray? If coating go ahead and top.

If sio2 spray would light polish


Sent from my iPhone using Tapatalk

[acuRAS82]

Sorry, I was under the impression that UK3.0 would be on, then WG SiO2 Paint Sealant. Therefore I think WG SiO2 PS would be partially degraded after 4-5 months and then some strong cleaning (but no need to polish) and on to Cancoat. If I guessed wrong with WG SiO2 PS (and UK3.0 already being applied beforehand), my advice could be erroneous.

[Bladegunner]

Going to be WG sealant not spray, Since ordered and have that product. I will do a light finish polish and apply it next weekend then in early spring I will probably do the Cancoat. Who knows by then I could have looked at 10 different products.

[acuRAS82]

Going to be WG sealant not spray, Since ordered and have that product. I will do a light finish polish and apply it next weekend then in early spring I will probably do the Cancoat. Who knows by then I could have looked at 10 different products.

And no CQ UK during any of this right?

Lol, sorry I had that in my head. And you will really like WG SiO2 I think. It’s amazing but just won’t last as long as a coating lite like Cancoat.

[Shane731]

I used Meguiar’s M27 Pro Hybrid Ceramic Sealant on my mom’s White Diamond Pearl CR-V.

[gorillapr]

On white I also like FK 1000p, cant go wrong with that one

Sent from my SAMSUNG-SM-G935A using Autogeekonline mobile app