Topper Removal Product

[CM's R/T]

I have Gyeon DuraFlex coating on my vehicle. I have played around with a few different toppers. I would like to experiment with a few more before I decide what one I prefer. Any recommendations for a product that will remove the topper, get me to a virgin surface, and not damage the base ceramic coating?

Sent from my SM-N975U using Tapatalk

[57Rambler]

Maybe something like DP Coating Prep Wash ?

It says it will remove waxes, oils, and sealants. But it does not say one way or another whether it will affect a coating. A call to the Geek's tech support may be in order for that info.

[FUNX650]

•IMO:
-A “Test Spot” should be part and parcel of
what I’ll refer to as experimental Coating
toppers’ removal products/processes.

-With that in mind:
Give P21S Total Auto Wash (TAW) a try.
(Start with a 1:4 dilution ratio.)


Bob

[BudgetPlan1]

I have Gyeon DuraFlex coating on my vehicle. I have played around with a few different toppers. I would like to experiment with a few more before I decide what one I prefer. Any recommendations for a product that will remove the topper, get me to a virgin surface, and not damage the base ceramic coating?

Sent from my SM-N975U using Tapatalk

What toppers were you playing around with?

[Coatingsarecrack]

I use mckees coating prep wash to maintenance wash my CQUK3 and it gets it squeaky clean. I also have my hood uncoated and it seems to damage remove toppers i use on their. No adverse affects on coating.

The DP’s probably similar.


Foam with it, let dwell, rinse. Then bucket wash and your good.


Sent from my iPhone using Tapatalk

[Mike Phillips]

I don't know how a person could ever tell what has or hasn't been removed.

Unless you can shrink yourself down to the size of Ray Palmer aka the Atom and have a walk around on the surface to survey it after any process done to remove the topper.






I guess you could try a prep polish like recommended but - how would you ever know what was really removed or left behind?

[CM's R/T]

Gyeon Cure, Mothers CMX, Mc Kees, Wolfgang Sealant, Meguire Ceramic. There may be one or two I missed.

Sent from my SM-N975U using Tapatalk

[Coatingsarecrack]

I use mckees coating prep wash to maintenance wash my CQUK3 and it gets it squeaky clean. I also have my hood uncoated and it seems to damage remove toppers i use on their. No adverse affects on coating.

The DP’s probably similar.


Foam with it, let dwell, rinse. Then bucket wash and your good.


Sent from my iPhone using Tapatalk

Mikes right about this and you’ll never truly know. After i did this process the first time i followed up with a reset foam and wash to make sure it was clean ant coating prep soap wasnt leaving behind a film masking the properties of the LSP.

Couldnt tell you if it was all gone but can definitely say performance was severely degraded


Sent from my iPhone using Tapatalk

[DUBL0WS6]

Anything strong enough to remove a topper would probably remove what's under it.