Mike---Is Dr. Beasley's NSP Z1 Available?

[TMQ]

I want to use the Z1 on a 2019 white Mustang GT350 with blue stripes.

Can I get my hands on some?

See post: Review: Dr. Beasley's NSP Z1 - One Step Primer &...

Was asking there at that post above..

Tom

[TMQ]

Was checking out the store...don't see anything re Z1.

Gather it isn't available.

Tom

[briarpatch]

so far...only place I can find it is on Dr Beasleys website

[TMQ]

Duh...

Didn't think of going to their store! Geez...getting slow here!

Thanks! Yes I see they have it. Plus lots info re different stuff they have--cool!

Tom

[Mike Phillips]

I want to use the Z1 on a 2019 white Mustang GT350 with blue stripes.

Can I get my hands on some?


Tom

Hi Tom,

See post #15 here,

Review: Dr. Beasley's NSP Z1 - One Step Primer & Nanocoating with Ti02 & Si02 + Composite Engineered Abrasives

[weekend warrior]

I want to use the Z1 on a 2019 white Mustang GT350 with blue stripes.

Can I get my hands on some?

See post: Review: Dr. Beasley's NSP Z1 - One Step Primer &...

Was asking there at that post above..

Tom

Hi Tom...hope all is well...I been reading about DR. Beasley car products....MY care is a 2019 Camry...I used sealant ..then I coated it....car looks good as far as I can see...If I switch over to Dr. Beasley's do I need to start from scratch...polish...paint prep...then Dr. Beasley's...what products should buy...Thanks...

[98CayenneTA]

Hi Tom...hope all is well...I been reading about DR. Beasley car products....MY care is a 2019 Camry...I used sealant ..then I coated it....car looks good as far as I can see...If I switch over to Dr. Beasley's do I need to start from scratch...polish...paint prep...then Dr. Beasley's...what products should buy...Thanks...

In my findings you will need to strip it back down.

I tried going over a panel that was previously coated with Cquartz Uk 3.0 and it hazed up.
Stripped the panel back down then went at it again with Dr. Beasley NSP Z1 and got a nice finish with a beautiful glow

[TMQ]

Hi...

Yeah...Ditto with what Cayenne said.

You have sealant and then a coating....Best to strip it down and start over.

Tom