Cquartz issue?

[Chrisong]

I applied cquartz uk3.0 about a week ago but now I notice these spots near the headlights (as circled in white). Pardon the water spots as well cause have yet to wash car

I did the usual methods prior to coating. Wash decon polish ipa then coating. To my memory I did not notice these spots when I apply.

At certain angles they are not visible. Tried mf cloth to gently rub but unable to.

Any idea what might these be? And how to remove?

TIA!

Sent from my LIO-L29 using Autogeekonline mobile app

[WillSports3]

Looks like you need to just hand polish a little bit, could be left over coating you failed to wipe off during the installation process

[Chrisong]

Hmm. So after hand polish I should reapply the coating over the area?

Sent from my LIO-L29 using Autogeekonline mobile app

[Bruno Soares]

Hmm. So after hand polish I should reapply the coating over the area?

Sent from my LIO-L29 using Autogeekonline mobile app

Yes, the polish will remove the coating that is there now.

[Chrisong]

Do I need to redo the decon steps for the portion?

Sent from my LIO-L29 using Autogeekonline mobile app

[Bruno Soares]

Do I need to redo the decon steps for the portion?

Sent from my LIO-L29 using Autogeekonline mobile app

No, polish, wipe with Eraser, then coat again. I haven’t had luck with blending and just opt to do the whole panel that requires the work.

[Chrisong]

Mine is near the headlight and a blend so kinda inconspicuous but I will try recoating cquartz and see

Sent from my LIO-L29 using Autogeekonline mobile app

[Coatingsarecrack]

No, polish, wipe with Eraser, then coat again. I haven’t had luck with blending and just opt to do the whole panel that requires the work.

Second the whole panel. Spot fixing doesnt work


Sent from my iPhone using Tapatalk

[coles_paint_correction]

To me that almost looks like dried liquid soap stain that didn't get rinsed fast enough, I've had similar things
that look like that when I leave soap or other liquids on the paint for too long it almost stains it in a way kinda hard to explain.
But like others said ipa, polish, coat etc again should be fine.

[WillSports3]

If you don't want to do the entire hood, I've had good luck with taping off a square section around it and then just doing that section.