Body Shop Left Buffer Marks

**Konnekt1** · 03-02-2020, 03:36 PM

So I had to get a door replaced on my 2019 Silverado.

Brought it in got the door change fender and back door blended to match. Got the truck back on a cloudy day every thing looked good.

Used my iPhone light later that night and could see swirl marks from a buffer all over the door. In the sun from an angle same thing. I know the pictures aren't great and its dusty at work right now.

Is there any way to fix this with like a light to medium polish and a DA, or should I bring it back to them and have them fix it.

I have used this body shop for years and never had a problem with them.

Thanks

Body Shop Left Buffer Marks-img_5123-jpg

Body Shop Left Buffer Marks-img_5124-jpg

Body Shop Left Buffer Marks-img_5125-jpg

**Rsurfer** · 03-02-2020, 03:52 PM

Originally Posted by Konnekt1

Is there any way to fix this with like a light to medium polish and a DA, or should I bring it back to them and have them fix it.

I have used this body shop for years and never had a problem with them.

I would fix it myself rather then having to take it back and getting body shop dust and grime all over your ride.

Use a finishing polish with your DA.

**Konnekt1** · 03-02-2020, 04:05 PM

I have CG V36 and V38 will that work? I have other little blemishes so I was going to hit the whole truck with both then put a glaze on for now until I can actually wax that door. Which disc should I use for that?

**DBAILEY** · 03-02-2020, 04:07 PM

Yes, they would work. You should be able to remove them with a white polishing pad.

**Konnekt1** · 03-02-2020, 04:15 PM

Cool I’ve never actually used a glaze. How long will that hold up because I won’t be able to wax until around may.

Mike Phillips · 03-02-2020, 04:36 PM

Originally Posted by Konnekt1

Is there any way to fix this with like a light to medium polish and a DA, or should I bring it back to them and have them fix it.

I have used this body shop for years and never had a problem with them.

I see this body shop problem a LOT in the 18 years I've been answering car detailing questions online as well as even longer in the real world. Here's my normal answer.

If the shop couldn't do it right the first time? What's changed?

Do they have a new guy?
A new tool?
A better product?

If nothing has changed - they won't be able to fix it. And in most cases, nothing is going to change. They will just re-buff and then apply some kind of glaze hoping you'll be happy and go away.

Originally Posted by Konnekt1

I have CG V36 and V38 will that work?

I would get something different.

I see a lot of issues brought up about micro-marring when using certain brands of products on dark colored paints. These are two that come up a lot.

Abrasive Technology - THE most important factor when it comes to polishing paint

And - if a product isn't working on dark colored cars - it isn't working on light colored cars either - it's just harder for your eyes to see the micro-marring on light colored cars.

**Konnekt1** · 03-02-2020, 06:13 PM

Would would you recommend use and do to fix this problem my self?

**PaulMys** · 03-02-2020, 06:21 PM

What DA machine do you have?

What pads?

**Konnekt1** · 03-02-2020, 06:28 PM

The torqx with the chemical guys pads is what I have at the house.

**PaulMys** · 03-02-2020, 06:37 PM

Grab some Meg's 105/205 or Griot's correcting creams if you can find them.

Should do the trick.

(Simplest answer I can give you without going insane with product recommendations).