Looking for Product Suggest to use with Bead Maker

[Coatingsarecrack]

Car Pros essence+ sounds like what your looking for


Sent from my iPhone using Tapatalk

[gorillapr]

303 Touchless Sealant as a base and Bead Maker as a drying aid

Sent from my SAMSUNG-SM-G935A using Autogeekonline mobile app

[Rsurfer]

Isn't 3D Poxy a wax?

Poxy contains Montan wax and shouldn't be under a sealant.

[XJL]

I haven't tried Powerlock but it's definitely on my radar. Do you know if it has any fillers or masks minor imperfections? What dilution ratio are you using for ONR?

I'm not sure about fillers but probably not. As far as the ONR, I use the dilutions ratio recommended for doing a rinse less wash and I get the ONR with Carnuba wax added.

[gorillapr]

Turtle Wax Seal and Shine

Sent from my SAMSUNG-SM-G935A using Autogeekonline mobile app

[Coatingsarecrack]

I got a month with Seal and Shine in constant northwest rain. Difficult for me to apply too. Also Griots 3-1 ceramic wax outperformed it. In self cleaning and water sheeting. I posted some results in the griots 3-1 thread on here or autopia.

Wish I had my $6 dollars back....


Sent from my iPhone using Tapatalk

[gorillapr]

I got a month with Seal and Shine in constant northwest rain. Difficult for me to apply too. Also Griots 3-1 ceramic wax outperformed it. In self cleaning and water sheeting. I posted some results in the griots 3-1 thread on here or autopia.

Wish I had my $6 dollars back....


Sent from my iPhone using Tapatalk

Really, Seal and Shine a beast on durability, that is very revealing.
How long Griots last you?

Sent from my SAMSUNG-SM-G935A using Autogeekonline mobile app

[Coatingsarecrack]

I applied GC3-1 on 1/7 still going but slowing a little. My guess is it would be good for 3-4 months.



Note though: we had our third wetted January noted and the car is a daily driven 80 miles to and from work.

Took alot more abuse than it see and saw more rain than most times. I also washed twice i. January through tunnel wash and pre soaked with Bilt Hamber Autofoam. It’s alkaline although i dont know if it was slightly or heavy on level. That probably affected both but i do consider that normal use.

If you look up GC3-1 thread you can see my comparison. TWSNS beads up still but wasn’t sheeting off of car well after a month.

Tight water beads that don’t roll off of car cause tight water spots. Most important job of an LSP for me in WA in winter is to sheet water. Rest of the year it’s to look pretty.




Sent from my iPhone using Tapatalk

[gorillapr]

I applied GC3-1 on 1/7 still going but slowing a little. My guess is it would be good for 3-4 months.



Note though: we had our third wetted January noted and the car is a daily driven 80 miles to and from work.

Took alot more abuse than it see and saw more rain than most times. I also washed twice i. January through tunnel wash and pre soaked with Bilt Hamber Autofoam. It’s alkaline although i dont know if it was slightly or heavy on level. That probably affected both but i do consider that normal use.

If you look up GC3-1 thread you can see my comparison. TWSNS beads up still but wasn’t sheeting off of car well after a month.

Tight water beads that don’t roll off of car cause tight water spots. Most important job of an LSP for me in WA in winter is to sheet water. Rest of the year it’s to look pretty.




Sent from my iPhone using Tapatalk

Agreed!
Sheeting >>> beading

Sent from my SAMSUNG-SM-G935A using Autogeekonline mobile app