-
Quick Detailer that I've been using resently...
Hi guys,
I just came up with this quick detailer a few weeks ago while I was doing a rinseless wash on my car with ONR. So I started soaking the panels with ONR as a QD ratio (2oz ONR to 30oz H2O), then wipe the panel with my Optimum BRS and rinseless wash bucket solution and the spray my QD combo:
2oz ONR + 4oz of Bead Maker + 26oz H2O)
I think it is what the ONR QD formula needed, the BM adds some descent slickness and gloss to the panel, I was super happy with the results. I think is worth trying it.
Sent from my SAMSUNG-SM-G935A using Autogeekonline mobile app
-
Super Member
Re: Quick Detailer that I've been using resently...
I think you’d be much better off going with full strength undiluted Bead Maker instead of a bottle containing 26oz. of water.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: Quick Detailer that I've been using resently...
True and BM is cheap, but Im not a fan of topping products and this car has Megs Hybrid Ceramic Wax on it so I dont want to use full strenght Bead Maker on it because I dont believe it will really bond and is a waste of product, but on that QD mix is basically very little product and it gives a nice finish. ONR by itself as a QD leaves no gloss or slickness on surface but with those 4 oz of BM makes a nice difference
Sent from my SAMSUNG-SM-G935A using Autogeekonline mobile app
-
Super Member
Re: Quick Detailer that I've been using resently...
Originally Posted by
gorillapr
True and BM is cheap, but Im not a fan of topping products and this car has Megs Hybrid Ceramic Wax on it so I dont want to use full strenght Bead Maker on it because I dont believe it will really bond and is a waste of product
My guess is BM would indeed bond for some time, but you will lose the self-cleaning during the bonding time... kind of a waste of the Megs HCW if you like the self-cleaning.
-
Re: Quick Detailer that I've been using resently...
Originally Posted by
acuRAS82
My guess is BM would indeed bond for some time, but you will lose the self-cleaning during the bonding time... kind of a waste of the Megs HCW if you like the self-cleaning.
Correct, thats why I dont use BM pure as a drying aid
Sent from my SAMSUNG-SM-G935A using Autogeekonline mobile app
-
Super Member
Re: Quick Detailer that I've been using resently...
Try Megs Hybrid Ceramic Detailer. Made to wirk with HCW. Goes on smooth and boost the self cleaning and beading.
Sent from my iPhone using Tapatalk
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Re: Quick Detailer that I've been using resently...
Yes, I have to buy it.
I think Guz made a good review of it and it is also great to top ceramic coatings.
Sent from my SAMSUNG-SM-G935A using Autogeekonline mobile app
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
Bookmarks