iK foam pro 12 quick review

[Daviddear30]

Ik foam pro 12
Quick review

First off this thing is built like a tank!
Much much beefier than other sprayers I have used.

Pros
Foam without pressure washer (I have 3 pw but this will be used for wheels and tires)
Very sturdy
Can be filled with compressed air without modification
Makes great foam
3 different foaming tubes/styles of foam
Extra filters
Great handle/gun

Cons
Cost to some? I think it's worth it

I have a tiny pancake air compressor that I used to fill it up the first time. Then I tried my 18v ryobi air compressor/inflator.
Sure most of you guys have some type of tire inflator if you don't have a big compressor.

It took the ryobi inflator 2min and 5 seconds to fill it to fully pressurized with just over a gallon of liquid.

The video is with brake buster (10 ounces plus a gallon of water) super diluted and made great foam.

YouTube

Sent from my SM-G965U using Tapatalk

[Klasse Act]

Sorry I'm not understanding how you fill it, I thought it had a valve stem like what's found on a car to fill it or do I need to use the thin thing used to fill a sports ball with

Sent from my SM-G950U using Tapatalk

[Daviddear30]

You can pressurize it with the pump, air compressor, or tire inflator.
It has a valve like a car tire.

Sent from my SM-G965U using Tapatalk

[mpulsiv]

You can pressurize it with the pump, air compressor, or tire inflator.
It has a valve like a car tire.

Sent from my SM-G965U using Tapatalk

How long does it last once fully pressurized? Few minutes to do a full car?

[Klasse Act]

I usually have to pump my IK 9 up 3x's but keep in mind I'm doing the wheelwells, tires and wheels as well as the car and I like to be thorough

Sent from my SM-G950U using Tapatalk

[bfielder32087]

Just placed an order for one so in the near future I'll be able to give my opinion on it.

Sent from my SM-G975U using Autogeekonline mobile app

[chet31]

I usually have to pump my IK 9 up 3x's but keep in mind I'm doing the wheelwells, tires and wheels as well as the car and I like to be thorough

Sent from my SM-G950U using Tapatalk

What do you like better, the IK or the Worx?

[Daviddear30]

I air mine up once for all 4 wheels tires wheel wells etc

Let out the excess pressure afterwards

Sent from my SM-G965U using Tapatalk

[Klasse Act]

What do you like better, the IK or the Worx?

Can't really compare the 2, the Worx is a battery powered washer used to rinse down soap and the IK Foam 9 is a foamer to apply soap or various cleaners. I use them together to keep my ride looking its best

Sent from my SM-G950U using Tapatalk

[bfielder32087]

Got a chance to play with the new Foam Pro 12 today. Worked out real well honestly.

Filled it up with 1.5 gallons of water and then put about 3 ounces of CG Honey Dew because it was in reach. Have it a full charge (hand pumped, didn't use the valve) and used the standard foam setting and it did great. I went around the car twice, as said it was fully pressurized and somewhere in the middle I have it another 20 pumps or so. (MK7 GTI for reference)

It was an enjoyable experience and adds a lot of versatility for me now. Dwell time was quite good, better than using a pressure washer/foam gun combo I think. Even with something that isn't very strong at all like the CG soap it really broke down a lot of the dirt and grime. (Car was driven in the rain before I foamed the car.

I'll play more in the future with the other foam settings and different dilutions and different shampoos.

Sent from my SM-G975U using Autogeekonline mobile app