autogeekonline car wax, car care and auto detailing forum Autogeek on TV
car wax, car care and auto detailing forumAutogeekonline autogeekonline car wax, car care and auto detailing forum HomeForumBlogAutogeek.net StoreDetailing Classes with Mike PhillipsGalleryDetailing How To's
 
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member
    Join Date
    Aug 2021
    Posts
    90
    Post Thanks / Like

    Harbor Freight pressure washer

    I have a Harber Freight pressure washer. The unit continues to run after I release the button. Could you tell me if this is correct? I thought the unit should stop running when water spray button is not pushed.
    Thanks Electric unit

  2. #2
    Regular Member mattmann's Avatar
    Join Date
    Oct 2015
    Posts
    194
    Post Thanks / Like

    Re: Harbor Freight pressure washer

    Have one at my farm for my tractors. Mine shuts off when I pull the trigger but the noise continues for a second or two basically building up pressure in the line. Is this what you’re talking about?


    Sent from my iPhone using Tapatalk

  3. #3
    Super Member evo77's Avatar
    Join Date
    Mar 2008
    Posts
    582
    Post Thanks / Like

    Re: Harbor Freight pressure washer

    If the unit still runs when the trigger is not pulled then that is an indication that one of your hose connections is not properly sealed. The machine is trying to build pressure but it can't so it will continuously run until it kills itself (so hopefully you shut off the power quickly ).Look for drips or water pooling around the connections.

  4. Likes DFB liked this post
  5. #4
    Super Member oneheadlite's Avatar
    Join Date
    Aug 2015
    Location
    Andover, MN
    Posts
    1,727
    Post Thanks / Like

    Re: Harbor Freight pressure washer

    As mentioned above, if it's continuing to run after you let go of the trigger, it's seeing a pressure drop so it thinks it needs to run the pump.

    Try making all your hose connections/bleed the unit out in one area, then move it to a dry area. Check and see if you see any signs of water from any hose connections, the spray gun, or the unit itself.

    Is it a new unit or older? If older, it might just be worn internally so it's basically losing pressure inside the unit (making it think you've pulled the trigger) versus an external leak causing it to run. I've got a cheapie Ryobi pressure washer that after about 4 years starting to briefly cycle itself after sitting unused for about a minute. (Stop spraying, unit stops, sits briefly, then runs for about 2 seconds. Sits briefly, runs 1-2 seconds. Repeat until I get sick of it and power it off.)

    I think any of the budget pressure washers just have a limited lifespan.

  6. Likes DFB liked this post
  7. #5
    Junior Member
    Join Date
    Aug 2021
    Posts
    90
    Post Thanks / Like

    Re: Harbor Freight pressure washer

    Runs when trigger is pulled and when released

  8. #6
    Super Member oneheadlite's Avatar
    Join Date
    Aug 2015
    Location
    Andover, MN
    Posts
    1,727
    Post Thanks / Like

    Re: Harbor Freight pressure washer

    Which model specifically do you have?
    New/been in use for some time?

    Do you prime the unit on start up? (Turn water on with pressure washer off, hold trigger on gun until nothing but water comes out before turning unit on)

  9. #7
    Junior Member
    Join Date
    Aug 2021
    Posts
    90
    Post Thanks / Like

    Re: Harbor Freight pressure washer

    no thanks will try it

  10. #8
    Super Member oneheadlite's Avatar
    Join Date
    Aug 2015
    Location
    Andover, MN
    Posts
    1,727
    Post Thanks / Like

    Re: Harbor Freight pressure washer

    What's the warranty on their pressure washers? How old is yours?

  11. #9
    Junior Member
    Join Date
    Aug 2021
    Posts
    90
    Post Thanks / Like

    Re: Harbor Freight pressure washer

    probably 2 yrs im sure out of warranty thanks

  12. #10
    Super Member PaulMys's Avatar
    Join Date
    Jan 2014
    Location
    Eastern L.I. NY
    Posts
    10,773
    Post Thanks / Like

    Re: Harbor Freight pressure washer

    I'd have to see the mechanism and/or pump to be sure, but it could be a bad pressure regulator/switch.
    It is no coincidence that man's best friend cannot talk.

Page 1 of 2 12 LastLast

Similar Threads

  1. Harbor Freight DA
    By Balthezor in forum Auto Detailing 101
    Replies: 9
    Last Post: 09-28-2017, 11:06 PM
  2. Harbor Freight pressure washer, any good?
    By NikonGuy in forum Auto Detailing 101
    Replies: 12
    Last Post: 11-02-2015, 09:12 PM
  3. Harbor Freight DA
    By davidc in forum Auto Detailing Tools and Accessories
    Replies: 36
    Last Post: 04-30-2014, 09:21 AM
  4. Harbor freight DA?
    By agarabaghi in forum Auto Detailing 101
    Replies: 5
    Last Post: 08-18-2013, 05:56 PM

Members who have read this thread: 0

There are no members to list at the moment.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» April 2024

S M T W T F S
31 1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 1234