Dislikes: 0
-
Explain something to and old dummy!!
Almost embarrassed to ask but I see many dilution ratio discussions where someone may use a dilution ratio of a product (small number first> 1:40) and others may use a dilution ratio for another product (large number first> 10:1.) Is there a difference in how the two are mixed or just the way users quote the ratio?
-
Post Thanks / Like - 1 Thanks, 1 Likes, 0 Dislikes
bofh thanked for this post
-
Super Member
Re: Explain something to and old dummy!!
It's just the way they post it IMO. Honestly though, it should always be the highest number first, like a sports score for instance. Also, with the highest number first, it's always the water amount, the greater ratio, that is unless it's something like Super Clean where its inexpensive enough to go 1:1.
Sent from my SM-G950U using Tapatalk
2022 Elantra N Cyber Gray
Some say..."He likes Swedish fish because they're made with caranuba wax"
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: Explain something to and old dummy!!
most fields it's listed 1:4 but for some reason in detailing it usually goes the other way. In school many moons ago we were taught concentrated solution (solute): water or solvent
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: Explain something to and old dummy!!
Originally Posted by Klasse Act
It's just the way they post it IMO. Honestly though, it should always be the highest number first, like a sports score for instance. Also, with the highest number first, it's always the water amount, the greater ratio, that is unless it's something like Super Clean where its inexpensive enough to go 1:1.
Sent from my SM-G950U using Tapatalk
As I thought, but for an old fart who hasn't been really into correct detailing for may years, it can be confusing at times. I often question my understanding of these topics because of being a bit OCD.
-
Re: Explain something to and old dummy!!
Originally Posted by vobro
most fields it's listed 1:4 but for some reason in detailing it usually goes the other way. In school many moons ago we were taught concentrated solution (solute): water or solvent
That was my understanding of this as well, many, many, moons ago.
Thanks guys!
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Super Member
Re: Explain something to and old dummy!!
Originally Posted by vobro
In school many moons ago we were taught
concentrated solution (solute): water or solvent
Since “detailing” deals with chemicals, I write dilution
ratios as it’s done in Chemistry: solute : solvent
•In other words:
-The number on the left side of the ratio sign [:]
represents the amount of the detailing chemical.
-The number on the right side of the ratio sign [:]
represents the amount of the solvent.
*************************************
Let’s use the detailing chemical Meguiar’s D114;
and the solvent Water for an example.
•Assuming that the Rinseless Wash (RW) dilution
ratio of Meguiar’s D114 has been determined to be:
1 unit of D114, combined with 128 units of Water;
then:
-it would be reduced in writing by me as: 1:128
-interpreted by me as: 1 unit of D114 (the detail-
ing chemical) mixed with 128 units of water (the solvent)}
Eazy Peazy...
*****************************************
Bob
"Be wary of the man who urges an action in which he himself incurs no risk."
~Joaquin de Setanti
-
Post Thanks / Like - 0 Thanks, 3 Likes, 0 Dislikes
-
Super Member
Re: Explain something to and old dummy!!
I just remember the big number is water, lol.
-
Post Thanks / Like - 0 Thanks, 5 Likes, 0 Dislikes
-
Super Member
Re: Explain something to and old dummy!!
Originally Posted by rlmccarty2000
I just remember the big number is water, lol.
Yeah me too, maybe that makes us the bigger dummies? But it makes it easier.
"Dirt likes detergent so much better than the surface that it's attached to, it'll leave that surface to go hang out with the soap"... aim4squirrels
-
Post Thanks / Like - 0 Thanks, 2 Likes, 0 Dislikes
-
Super Member
Re: Explain something to and old dummy!!
Originally Posted by FUNX650
Since “detailing” deals with chemicals, I write dilution
ratios as it’s done in Chemistry: solute : solvent
•In other words:
-The number on the left side of the ratio sign [:]
represents the amount of the detailing chemical.
-The number on the right side of the ratio sign [:]
represents the amount of the solvent.
*************************************
Let’s use the detailing chemical Meguiar’s D114;
and the solvent Water for an example.
•Assuming that the Rinseless Wash (RW) dilution
ratio of Meguiar’s D114 has been determined to be:
1 unit of D114, combined with 128 units of Water;
then:
-it would be reduced in writing by me as: 1:128
-interpreted by me as: 1 unit of D114 (the detail-
ing chemical) mixed with 128 units of water (the solvent)}
Eazy Peazy...
*****************************************
Bob
I agree, but many moons ago it was the opposite.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
Re: Explain something to and old dummy!!
Thanks everyone for your replies.
Similar Threads
-
By Coopers ST in forum Off-Topic
Replies: 19
Last Post: 03-28-2014, 03:17 PM
-
By BlackCoupe in forum Off-Topic
Replies: 13
Last Post: 01-26-2013, 01:55 PM
-
By Qusai in forum Auto Detailing 101
Replies: 11
Last Post: 12-01-2012, 03:32 PM
-
By mark2dx in forum Auto Detailing 101
Replies: 16
Last Post: 12-05-2011, 12:37 AM
-
By szjalo in forum Auto Detailing 101
Replies: 9
Last Post: 11-08-2011, 08:28 AM
Members who have read this thread: 0
There are no members to list at the moment.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
S |
M |
T |
W |
T |
F |
S |
31 |
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
| 1 | 2 | 3 | 4 |
|
Bookmarks