BF One Step Topper?

**BTLew81** · 09-10-2019, 04:38 PM

Has anyone topped BF one step? Time is precious and this looks like a good option. Just looking to maximize durability through a topper and drying aid. Thanks in advance.

**The Guz** · 09-10-2019, 04:50 PM

I am pretty sure Mike has mentioned topping it with Sonax PNS.

Mike Phillips · 09-10-2019, 06:11 PM

I've used SONAX PNS and BLACKFIRE SiO2 Spray Sealant.

The SONAX PNS is a tick sticky to wipe-off but does last a long time. Just perfect your technique and it's all good. The BF SiO2 Spray Sealant is easy on, easy off.

**Jayfro** · 09-10-2019, 06:16 PM

Sonax PNS here on top of BF One Step, amazing results! I did it on my black Acura TLX and my wife's white X3. I've since changed to a carnuaba based wax...I wanted to try something different.

Sent from my iPad using Autogeekonline mobile app

**charliehaley** · 09-10-2019, 06:16 PM

I have topped with Wolfgang 3.0 after allowing the one step to cure overnight. It has only been one month based on looks it appears to be doing well. It is hard to say for sure that it bonded completely considering the one step leaves a sealant that would still bead water once the Wolfgang was gone.

**Markymapo** · 09-10-2019, 07:16 PM

I did half my F150 with BF one step for fun followed by Collinite 476 and the other half with just 476: let’s see how goes once winter hits in Dec

**Dr Oldz** · 09-10-2019, 09:28 PM

Funny this came up today. I just did a vehicle with BF One Step today. Topped with BF Midnight Sun. Looked fantastic. Usually my AIO jobs don’t get any added protection but this was a great client! The whole waxing with BFMS process only took an extra 10 min.

**acuRAS82** · 09-11-2019, 12:37 AM

Originally Posted by Dr Oldz

Funny this came up today. I just did a vehicle with BF One Step today. Topped with BF Midnight Sun. Looked fantastic. Usually my AIO jobs don’t get any added protection but this was a great client! The whole waxing with BFMS process only took an extra 10 min.

To my knowledge, you provided the Wet Fire Over Ice with that combo, as I believe One Step has identical sealant in it as BF Sealant. Good thinkin!

**Paul A.** · 09-11-2019, 07:59 AM

I'm a huge fan of staying in the family of products and would most likely grab a BF LSP.

HOWEVER, if Mike likes Sonax PNS as a topper for BF AIO then I'd be all over that also.